717996
12
Zoom out
Zoom in
Previous page
1/72
Next page
www.energetics.eu
12
Motion control
Walking belt speed can be increased, decreased or stopped using the Motion Control sensors on the handlebars.
To do this follows the instructions below:
1. Press the MOTION CONTROL button on the console to switch the
motion control functions on and off:
When the LED light is ON the MOTION CONTROL is active.
When the LED light is OFF the MOTION CONTROL is off.
2. After switching on the MOTION CONTROL wave your right hand approxi-
mately 10 cm above the motion sensor on the right handle bar to increase
the speed. The sensor will sound one short BEEP per scan and speed up by
0.1 km/h per BEEP. Holding your right hand approximately 15 cm above the
right sensor constantly results in the sensor sounding one long BEEP per
second and speeding up by 0.8 km/h per second.
3. Wave you left hand approximately 15 cm above the motion sensor on the
left handle bar to decrease the speed. The sensor will sound one short
BEEP per scan and decrease speed by 0.1 km/h. Holding your left hand
approximately 10 cm above the left sensor constantly results in the sensor
sounding one long BEEP per second and decreasing speed by 0.8 km/h per
second.
4. Wave both hands approximately 10 cm above both motion sensors at the
same time. The sensor will sound two short BEEP sounds then stop the belt.
Always switch o the motion control function by pressing the
MOTION CONTROL button on the console before turning o the power
to the treadmill.
(2) Use right sensor to speed up.
(3) Use left sensor to slow down.
(4) Use both sensors to stop belt.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Energetics PR 9.9hrc at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Energetics PR 9.9hrc in the language / languages: English as an attachment in your email.

The manual is 8,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info