717988
11
Zoom out
Zoom in
Previous page
1/128
Next page
11
EN
EL
SL
HR
BS
SR
BG
RO
TR
EN
EL
SL
HR
BS
SR
BG
RO
TR
Walking belt is slipping: First unplug the power cord from the surge protector. Using the hex key provided, turn
both the left and right rear roller adjustment bolts the same distance, usually a 1/4 turn in the clockwise direction.
Plug the power cord back into the surge protector and run the treadmill at 4 km/h (2.5 mph). You should now walk on
the belt to determine if the belt is still slipping. Repeat the above procedure until the walking belt is not slipping. The
tension should be just tight enough not to slip.
WARNING! Do not over tighten rollers! This will cause premature roller bearing failure!
Right and left tension bolts are located at the rear of the treadmill.
Assembly Information
1. Also refer to the drawings on the last pages of the manual.
2. Open the carton, put the main frame on the ground.
3. Fix the console cockpit on the uprights using designated screws (see assembly drawing for reference).
Important: Make sure you will not pinch, cut or damage the cable in any way (see hangtag). Please pay special
attention to the wire connecting of the upper board with the lower board. Please also make sure that you connect
the two cables correctly. The connection has been connected well once you hear a click sound. Any damage or
incorrect connection will cause major problems operating the machine.
Wire
Click
Wire
Click
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Energetics PR 7000hrc at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Energetics PR 7000hrc in the language / languages: English, Turkish as an attachment in your email.

The manual is 17,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info