633563
5
Zoom out
Zoom in
Previous page
1/60
Next page
5
EN
SL
HR
BS
SR
IMPORTANT INFORMATION
SAFETY KEY
The safety key must be inserted into the slot on the console and pushed all the way up in order to operate the tread-
mill. Always insert the safety key and attach the clip to your clothing at your waist before beginning your workout. If
you should encounter problems and need to stop the motor quickly, simply pull down the safety key to shut down
the power. To continue the operation, please turn off the power switch, wait a few seconds and switch it on again,
insert the safety key and push it up to the end.
ENGLISH / METRIC CONVERSION
The treadmill computer display can show METRIC and ENGLISH information. This should be preset for your area by the
factory. However, in case the treadmill needs to be converted between METRIC and ENGLISH readout, please follow
the procedure below:
Set the POWER SWITCH to ON. Press the START button on the computer and hold it. Insert the SAFETY KEY then re-
lease the START button. The computer will sound one short beep. Press the START button to switch between ENGLISH
and METRIC and press STOP button to confirm the setting. The computer will sound a long beep and will return to the
POWER ON mode with the new setting.
POWER ON
Set the POWER SWITCH, located on the base frame, to ON and insert the SAFETY KEY. All LED windows light up with
a short beep sound. If no further button inputs are made within 4 minutes, the computer will enter the SLEEP MODE.
Press any button to return to the POWER ON mode.
SLEEP / DISPLAY MODE
When the power is ON the computer will automatically enter SLEEP MODE if it is left idle for 4 minutes without receiv-
ing any input. Press any button to return to POWER ON status when the computer is in the SLEEP MODE.
If you don’t want to use SLEEP MODE, and wonder to get always light up status (DISPLAY MODE) on the screen, then
please consult the following procedure. Firstly, pull out the safety key, furthermore press and hold the SPEED UP and
DOWN buttons, insert the safety key to power on the treadmill. The computer will reply a short beep sound and
shows “1” on the display, press “START button to enter this setting program, and press the INCLINE UP and DOWN but-
tons to switch between “ON (SLEEP MODE features on) and “OFF” (SLEEP MODE features off) in following step. Finally,
please presses STOP/ENTER two times to save this setting and return to POWER ON mode.
STOP / ENTER
When the treadmill is running, press the STOP button to pause the treadmill at any time. All figures on the displayed
on the LED will freeze; furthermore the display shows “PAUSE”. Press START to resume the program and all displays will
continue the performance until the program finishes. If you continue pressing the STOP twice, then all data will return
to 0 and the treadmill will return to POWER ON status. If there is no action within 4 minutes, the treadmill will return to
POWER ON status.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Energetics PR 14.9 HRC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Energetics PR 14.9 HRC in the language / languages: English as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Energetics PR 14.9 HRC

Energetics PR 14.9 HRC Installation Guide - English - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info