Manual Energetics POWER RUN 2010HRC (page 11 of 145) (English, German)

717801

Zoom out

Zoom in

1/145

Moving and Storage

FOLDING

After your treadmill is completely assembled,

you may fold the machine into the upright

position for storage.

NOTE! Make sure the treadmill’s elevation is

at its lowest position before folding the deck to

avoid damage to your machine.

To fold the machine, raise the deck until it

locks into position. (Figure 1)

Make sure you hear the click sound of the

deck locking into position. This is to ensure the

deck is locked in place and will not drop back

down.

TO RELEASE THE RUNNING DECK

Hold the upper end of machine, pull the pin to

put down the frame to the ground. (Figure 2)

NOTICE! This machine has a built-in safety

unfolding feature to help lower the deck slowly.

Please make sure there are no children or

other things under the deck when you lower it.

TO MOVE THE TREADMILL

Before moving the treadmill, be sure the power

cord is unplugged from the wall and the

treadmill.

Fold up the running deck until it is locked

(Figure 3) and push the equipment on its

transportation wheels. Hold the handlebars to

move the treadmill forward. To prevent

malfunctioning of the treadmill, store it in a dry

place with as little temperature variation as

possible, protected against dust. Always

unplug the treadmill from the electrical outlet

when not in use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Energetics POWER RUN 2010HRC in the language / languages: English, German as an attachment in your email.

The manual is 5,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Energetics POWER RUN 2010HRC Manual

Product: