Manual Energetics POWER RUN 1010HRC (page 26 of 145) (English, German)

717799

Zoom out

Zoom in

1/145

COMPUTER TROUBLE SHOOTING GUIDE

ERROR

CODE

PROBLEM

POSSIBLE CAUSES

CORRECTION

E 1

The console has

not received a

signal from the

motor/speed

sensor within

certain time.

1. Wiring jack has a poor

connection.

2. There is too great a

distance between the

speed sensor and the

magnet on the front roller

pulley.

3. Sensor is faulty and/or

wiring has been

damaged.

4. Magnet on the front roller

pulley is

loose/fallen/missing.

5. Controller is burnt.

1. Re-insert the wiring jack

and ensure that a firm

connection is made.

2. Adjust the speed sensor

so that it sits 3mm (+/-

1mm) from the magnet.

3. Replace the sensor.

4. Replace the magnet.

5. Replace the controller.

Inspect if the position and distance are proper.

Check if the speed sensor is defective or

misplaced.

ERROR

CODE

PROBLEM

POSSIBLE CAUSES

CORRECTION

E 2

1. No readout or

abnormal

message on

display

2. Buttons not

working

3. Beeping sound

1. Damage to IC chipset or

IC base

2. Static Electricity

Interference (static

electricity may transfer

through hand pulse

receiver and damage the

IC)

1. Check if any cracks and

tilt can be seen on IC

base or broken

pins/leads on IC

2. a) Ensure the grounding

wire is firmly fixed in

place with the screw

b) Examine if there is

any damage to the small

PCB beneath the hand

pulse receiver plastic

cover

c) Check if LCD/LED

works properly

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Energetics POWER RUN 1010HRC in the language / languages: English, German as an attachment in your email.

The manual is 5,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Energetics POWER RUN 1010HRC Manual

Product: