562544
7
Zoom out
Zoom in
Previous page
1/752
Next page
EN
!
>> assembly and activation >> 05
Assembly and activation
Connecting the computer
Data cable: Connect the data cable coming from the equipment with the
one coming from the computer [1].
Mounting: Attach the computer to the mount on the equipment. Carefully
slide the insert sleeve on the back of the computer over the mount on the
centre post [2].
Pay attention not do damage the data cable when sliding the computer
housing over the mount.
Then you fasten the four fixing bolts [3].
Hand pulse sensors: Plug the hand pulse cable into the connector on the
back of the computer [4].
Power supply: The computer gets its power supplied through the data cable
of your equipment. Note: the equipment has to be plugged in and turned
on.
Computer activation
The computer can be activated by pressing any key or when the user starts
to pedal.
Start, control and signals
The computer starts with a short
beep when in the quick start mode.
This is displayed briefly in the orien-
tation line.
After a couple of seconds the display
changes to START PEDALING. You
can now start your work out or select
a special function.
Sleep mode
Should the E-205 not receive a signal for more than 4 minutes it changes into
the sleep mode. The display turns dark. To start again press any key or start
to pedal.
If the computer does not receive a signal
for more then 4 minutes the sleep mode is
activated.
DISTANCE KM
PULSE
CALTIME
KM/H WATT
DISTANCE KM
PULSE
CALTIME
KM/H WATT
1 2 33 4
7


Need help? Post your question in this forum.

Forumrules
1

Forum

energetics-et-22.1-ergometer

Reset search

  • There’s an Err2 showed when it’s plug in, i need support for this trouble Submitted on 7-9-2020 at 07:08

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Energetics ET 22.1 ERGOMETER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Energetics ET 22.1 ERGOMETER in the language / languages: All languages as an attachment in your email.

The manual is 17,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Energetics ET 22.1 ERGOMETER

Energetics ET 22.1 ERGOMETER Installation Guide - English - 11 pages

Energetics ET 22.1 ERGOMETER User Manual - English, German, Polish, Swedish, Finnish - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info