562531
10
Zoom out
Zoom in
Previous page
1/358
Next page
User Manual
>> training – functions and settings >> 08
!
During the workout the settings can only be changed when the
unit is idle. Changes can be made only when STOP appears, using
the MODE and SET-key.
!
Depending on which value is displayed when the MODE-key is
pressed and the setting mode is entered, the sequence of the
settings is changed.
Setting of functions
Start the computer by pressing any key. The computer scans through all
values (showing each for 6 seconds). The computer is in the display mode.
To change into the setting mode press the MODE-key. SCAN is no longer
visible.
• Press the MODE-key again and the workout time is displayed. Press the SET-
key until the desired time in displayed.
When the workout time is set press the MODE-key. Now calories (CAL) is
displayed. Press the SET-key until the desired Kilojoules value to be used is
displayed.
• After the calorie value is set press the MODE-key four times. The display will
switch to ODO (not adjustable), then PULSE (not adjustable), then speed
(not adjustable) and finally workout distance. Press the SET-key until the
desired workout distance is displayed.
When the workout distance is set press the MODE-key. The computer
switches back to the display mode.
Now the workout can begin.
Workout time
A workout time between 1 and 99 minutes can be selected. The time can be
entered in increments of one minute.
If a value for time is entered, the time will count down to 0. A beep tone
signals when 0:00 is reached.
If the value of the setting is left at 0:00, the time counts up and the current
value is displayed.
Calories used
Shows the approximate value of kilojoules used. The kilojoules to be burned
during the work out can be selected between 1.0 and 9990 and entered in
increments of 1 and 10.
• Entered in increments of 1 kilojoule up to the value of 1000 kilojoules
• Above 1000 kilojoules in increments of 10 kilojoules
If a value is entered the kilojoules used count down. A beep tone signals
when 0.0 value is reached.
If the value of the setting is left at 0.0, the kilojoules used counts up and the
current value is displayed.
TIME
CAL
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Energetics ET 14.1 MAGNETIC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Energetics ET 14.1 MAGNETIC in the language / languages: All languages as an attachment in your email.

The manual is 3,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Energetics ET 14.1 MAGNETIC

Energetics ET 14.1 MAGNETIC Installation Guide - English - 16 pages

Energetics ET 14.1 MAGNETIC User Manual - English, German, French, Italian, Polish, Swedish, Finnish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info