717784

Energetics CT 570 ERGOMETER BIKE Manual

13
Zoom out
Zoom in
Previous page
1/77
Next page
13
RESET
Press the START/STOP button for 2 seconds to set all displayed values back to zero.
OPERATION INSTRUCTION:
A. Plug in the power
Plug in the adaptor to the equipment. The monitor will produce a beep sound and turn on the
monitor.
B. Determine the User (Only Can Process in the STOP Mode.)
1. Press the User button to the USER DATA, only can use on the stop mode.
2. Press the Enter to the USER SELECT
3. Turn the “ MODUS” button to select the User from U1 to U4
4. Press the Enter to decide the User
5. Turn the “ MODUS” button to set up your height, and then press the Enter to confirm your
setting value.
6. Turn the “ MODUS” button to set up your weight, and then press the Enter to confirm your
setting value.
7. Turn the “ MODUS” button to set up your age, and then press the Enter to confirm your
setting value.
8. Turn the “ MODUS” button to set up your sex, and then press the Enter to confirm you are
M (male) or F (female).
9. Finish the user data input.
C. Program select and setting value
C-1 Manual Program
1. Turn the “ MODUS” button to select the Manual program.
2. Press the Enter Button to choose the manual program.
3. The Time display will flash, and then turn the “ MODUS” button to set up the desired time to
do the exercise. Press ENTER button to confirm your setting value.
4. The distance display will flash, and then turn the “ MODUS” button to set up the desired
distance value. Press ENTER button to confirm your setting value.
5. The Calories display will flash, and then turn the “ MODUS” button to set up the desired
calories to be consumed. Press ENTER button to confirm your setting value.
6. Press the start/stop MODUS to begin exercise.
Note: 1. Time and distance cannot set up at the same time in this program.
2. When you reach the target, the monitor will produce beep sound and then stop.
3. If you set up more than one target and you would like to reach next target, press
start to exercise again.
C-2 Preset Program:
Rolling, Valley, Fat Burn, Ramp, Mountain, Intervals Program
1. Turn the “ MODUS” button to select one of the above programs.
2. Press the Enter Button to enter this program.
3. The Time display will flash, and then turn the “ MODUS” button to set up the desired time
to do the exercise. Press ENTER button to confirm your setting value.
4. The distance display will flash, and then turn the “ MODUS” button to set up the desired
distance value. Press ENTER button to confirm your setting value.
5. The Calories display will flash, and then turn the “ MODUS” button to set up the desired
calories to be consumed. Press ENTER button to confirm your setting value.
6. Press the start/stop MODUS to begin exercise.
Note: 1. Time and distance cannot set up at the same time in this program.
2. When you reach the target, the monitor will produce beep sound and then stop.
3. If you set up more than one target and you would like to reach next target, press
start to exercise again.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Energetics CT 570 ERGOMETER BIKE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Energetics CT 570 ERGOMETER BIKE in the language / languages: English, German as an attachment in your email.

The manual is 8,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info