Manual Energetics CT 1080 ERGOMETER (page 6 of 83) (English, German)

717785

Zoom out

Zoom in

1/83

Step 3

1. Secure the Handle Bar (3) onto the Console

Mast (2) with the 2pcs of 5/16” x 5/8” Hex

Head Screws (51), 2pcs of 5/16” x 19 x 1.5T

Flat Washers (72) and 2pcs of 8m/m Split

Washers (103) by using the 12/14mm Wrench

(100).

2. Let the Handpulse W/Cable (26) through the

Console Plate onto the Console Mast (2) and

out from the Console Plate.

Step 4

1. Insert the Computer Cable (29) and

Handlepulse W/Cabls (26) onto the Console

(34).

2. Secure the Console (34) onto the Front

Console Mast (2) with the 4pcs of M5 x 12mm

Phillips Head Screws (58) by using the Phillips

Head Screw Driver (93).

3. Secure the Front Stabilizer Cover (40) and the

Rear Stabilizer Cover (41) onto the Main Frame

(1) and the Rear Stabilizer (5) with the 4pcs of

M5 x 12m/m Phillips Head Screws (58) by

using the Phillips Head Screw Driver (93).

4. Install the Pedal (L)(R) (45)(46) onto the Crank

(L)(R) (16L)(16R) by using the13/15mm

Wrench (92).

5. Turn on the Locking Knob (106) and install the

Inner Slide Assembly (6) into the Outer Slide

(1).

6. Adjust the highly and tighten the Locking Knob

(106).

7. Turn on the Fore Aft Adjustment Knob (86)

and install the Seat Slide Bracket (7) put on the

Inner Slide Assembly (6).

8. Adjust the position and tighten the Fore Aft

Adjustment Knob (86).

9. Install the Seat Bottom Cushion on the Seat

Slide Bracket (7) by using the 12/14mm

Wrench

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Energetics CT 1080 ERGOMETER in the language / languages: English, German as an attachment in your email.

The manual is 2,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Energetics CT 1080 ERGOMETER Manual

Product: