Do not expose the battery/charger to harsh chemicals.
Keep the battery/charger away from children and animals.
Do not expose the battery/charger to flame or other high heat sources.
Charge battery regularly.
It is important to maintain at least 30% of your battery power when not in use.
Do not expose the battery/charger in a place with heat or with direct sunshine.
The chemical reaction during charging and discharging a LiFePO4 battery is not fully
reversible. Due to that, LiFePO4 batteries loose capacity during their life-span. This is
normal and not a manufacturing nor production fault.
FOR PROFESSIONAL INSTALLATION ONLY. These instructions are for
general guidance. Installation procedures may vary depending on your
situation
The LI12100 battery should not be used or installed by people, who don’t
have experience or knowledge how to use it. The user must have enough
competency to install it. Otherwise he must ask for help by qualified
personnel.
Unpack all the components and check for the presence of all parts (see package contents
list). Make sure the goods meet your requirement.
Check if the battery isn’t damaged during the transport.
The battery should be put in indoor environment with good ventilation and good cooling
system. Do not expose to humid, high temperature, flammable, explosive gas
environments.
Find a suitable place for LI12100 battery such as a storage area, under a seat or a bed.
Make sure there is sufficient ventilation all around. A space of at least 10cm should be
allowed.
Make sure that the battery cannot be completely covered by cloths or
other isolation materials!
The plus (+) and minus (-) cables can be fixed to the output
terminals of the battery with the supplied M8 washers and bolts.
The output terminals of the battery must be covered by the
supplied isolation caps.
The plus (+) and minus (-) cables can also be connected via
quick clamps (not supplied) to the supplied DIN battery terminals.
