768040
14
Zoom out
Zoom in
Previous page
1/52
Next page
ENGLISH
14
!
QDab away excess grease/marinade from the grill
items before placing them on the grill. This does not
reduce the flavour of the grill items but solely serves
the purpose of preventing grease fires.
QClean the grill after each use.
QDo not use any abrasive or chloric cleaning agents.
QPull out the grease drip tray and the grease cup and
dispose of the grease in an environmentally sound
manner.
QWipe of the surfaces with a damp rag or rinse them
off with hot water. If necessary, use a mild cleaning
agent. Rinse off with water and dry all surfaces with
a microfibre cleaning cloth.
QWhen using a mild cleaning agent, you should also
observe the manufacturer’s instructions/product
information, to avoid damage to the surface.
QAllow the appliance to thoroughly dry before using it
again.
QIf, in exceptional cases, the burner tube is clogged,
it must be cleared using a needle or a pipe cleaner.
CLEANING/SERVICING THE GAS GRILL
QDespite careful processing of all individual
parts, individual components can have
sharp edges. Therefore, please wear safety
gloves, to avoid getting cut.
QHot surface: Do not clean the gas grill until it
has sufficiently cooled off.
RISK OF FIRE AND EXPLOSION
Avoiding grease fires:
QClean the appliance each time before use,
to avoid the accumulation of grease. When
doing so, pay particular attention to grease
accumulation on the inside of the firebox,
the flame covers, the grease drip tray and
the grease cup.
QDo not use any flammable cleaning agents.
Handling the gas installation/gas grill:
QRepairs and servicing of the gas-conveying
parts can only be conducted by specialists
authorized to do so.
QDo not make any modifications to the gas
grill or pressure regulator. The hose must
be serviced after 5 years (refer to the date of
manufacturer on the hose).
QReplace the pressure regulator and the
hose after 10 years at the latest; even if no
external damage can be detected. Make sure
that the pressure regulator is approved for
your country and the gas used and that it is
adjusted to the correct output pressure (refer
to Technical Specifications) . A new hose
cannot be longer than 1.5 m.
QAll components, which were sealed by the
manufacturer or its representative, cannot
be manipulated or modified.
QTogether with oil, the gas forms an explosive
mixture. Never try to loosen tight valves or
regulator knobs with oil or penetrating oil.
QThe burners can be removed for cleaning
purposes.
SAFETY NOTICE
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Enders Monroe Pro 4 SIK Turbo - 8378 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Enders Monroe Pro 4 SIK Turbo - 8378 in the language / languages: English, Dutch, Spanish as an attachment in your email.

The manual is 4.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Enders Monroe Pro 4 SIK Turbo - 8378

Enders Monroe Pro 4 SIK Turbo - 8378 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info