Manual Enders Monroe Pro 3 SIK Turbo - 8376 (page 9 of 52) (English, Dutch, Spanish)

768039

Zoom out

Zoom in

1/52

MONROE PRO 3 SIK TURBO 8376630

TURNING ON THE INFRARED GRILL

1. Open the lid and turn all control knobs to the “ “

position

2. Press and hold the control knob for the infrared

burner and turn it counterclockwise to the highest

setting. (When doing so, you can hear a CLICK). The

burner ignites. If the burner does not ignite, repeat

this step.

3. If the burner does not ignite, wait approx. 5 minutes

and repeat step 2.

4. If the burner does not ignite, you can ignite

the appliance using a long match! Contact the

manufacturer, to eliminate the malfunctioning of the

ignition .

5. To turn off the infrared grill, turn the control knob

to the “ “ and close the valve on the gas cylinder.

ATTENTION!

The infrared burner is not infinitely variable.

ATTENTION!

Infrared burners cannot be used simultaneously like the

other burners.

Before grilling with the gas grill for the first time, allow

the burners to burn for 15 minutes without any grill

items, to remove residue from preserving agents. This

can lead to a slightodour development. Provide for suf-

ficient ventilation. The colour of the lid and the firebox of

the gas grill can slightly change. This is a natural pro-

cess and does not constitute a complaint.

1. Open the lid of your grill.

2. You can ignite the burners independent of one

another.

3. First, turn all control knobs clockwise to the OFF

position “ “ and then, open the valve on the gas

cylinder!

TURNING ON THE GAS GRILL

TURNING OFF THE GAS GRILL

To turn off the grill, close the valve on the gas cylinder

and turn all control knobs to the “ “ position.

4. Press one of the control knobs and turn it counter-

clockwise to the highest setting “+”. When doing so,

you can hear a CLICK. The burner ignites. If the burner

does not ignite, turn the knob back to the OFF position

“ “ and repeat these steps 3 to 4 times.

5. ATTENTION: If the burner does not ignite, turn the

control knob clockwise to the OFF position “ “ and

close the valve on the gas cylinder. Wait 5 minutes

and start with step 4 after opening the valve on the

gas cylinder again.

6. When the one burner has ignited, repeat step 4, to

ignite the other burners.

7. Regulate the heat by turning the control knob to

any setting between the highest setting “+” and the

lowest setting “-”.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Enders Monroe Pro 3 SIK Turbo - 8376 in the language / languages: English, Dutch, Spanish as an attachment in your email.

The manual is 3.68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Enders Monroe Pro 3 SIK Turbo - 8376

Enders Monroe Pro 3 SIK Turbo - 8376 User Manual - German - 36 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Enders Monroe Pro 3 SIK Turbo - 8376 Manual

Product: