Manual Emtec Movie Cube Theater T800 (page 22 of 24) (English)

473772

Zoom out

Zoom in

1/24

Specically for Liquid Crystal Display (“LCD”) screens:

Despite the highest possible standards, the intricate manufacturing of Liquid Crystal Display (LCD) screens may still produce slight

visual imperfections that do not impair the performance of your Movie Cube Theater. The warranty is applicable if you see either:

• 3 bright pixels OR 5 dead pixels OR a total of 8 bright or dead pixels; or

• 2 adjacent bright pixels OR 2 adjacent dead pixels; or

• 3 bright pixels AND / OR dead pixels in an area of 15 mm of diameter.

Note: A bright pixel is a sub pixel or white pixel permanently displayed on your screen. A dead pixel is a pixel or sub pixel that

remains black on your screen.

For complete information regarding EMTEC Movie Cube warranty and customer support please visit our website: www.emtec-

international.com

7. License information

specied below.

This product contains Free Software which is licensed under the GNU General Public licence, Version 2 (GPL). You will nd

hereinafter a copy of the GPL licence text.

We oer, valid for at least 3 years, to send you the source code of the GPL software. Please contact us at Dexxon Data Media -

gplsourcecodes@dexxon.eu. We will charge a fee for the physical act of transferring a copy.

GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be

distributed under the terms of this General Public License. The «Program», below, refers to any such program or work, and a «work

based on the Program» means either the Program or any derivative work under copyright law: that is to say, a work containing the

Program or a portion of it, either verbatim or with modications and/or translated into another language. (Hereinafter, translation

is included without limitation in the term «modication».) Each licensee is addressed as «you».

Activities other than copying, distribution and modication are not covered by this License; they are outside its scope. The act of

running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on

the Program (independent of having been made by running the Program). Whether that is true depends on what the Program

does.

1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you

conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all

the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of

this License along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may at your option oer warranty protection in exchange

for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy

and distribute such modications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) You must cause the modied les to carry prominent notices stating that you changed the les and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any

part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.

c) If the modied program normally reads commands interactively when run, you must cause it, when started running for such

interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a

notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under

these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does

not normally print such an announcement, your work based on the Program is not required to print an announcement.)

These requirements apply to the modied work as a whole. If identiable sections of that work are not derived from the Program,

and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to

those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which

How do I change the source to VGA on my emtec projector. The source button wont take me there. Submitted on 9-11-2020 at 21:48
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Emtec Movie Cube Theater T800 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Emtec Movie Cube Theater T800 Manual

Product: