Manual Emtec H140 (page 6 of 65) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish)

473756

Zoom out

Zoom in

1/65

No need to select the TV mode.

 SHIFT+Volume+/-:menunavigationkeys,allowyoutonavigate

left and right into the menu of your appliances.

[9] Teletext MIX: Allows to mix the Teletext and the picture of the

selected channel.

[10]Mute:Allowsyoutoturnon/offthesound.Youcancontrolthe

«Mute» function of your TV even when you are in VCR, DVD or SAT

mode. No need to select the TV mode.

 SHIFT+Mute:OKkey,conrmstheselection.

[11] Teletext OFF:

TV mode: Stop Teletext.

 SHIFT+TeletextOFF:ExitMenu.

[12] Teletext Hold: Stop page change in Teletext mode.

[13]Numerickeys0-9:Workthesamewayasyouroriginalremote.

[14] Teletext ON:

 TVmode:Start/stopTeletext.

 SHIFT+TeletextON:MenuON.

[15] ENT: If you are in programming mode – automatic code

search-youcanconrmthecodeofthedeviceyouwanttocontrol.In

connectionwiththenumerickeys,thisbuttonallowsyouwithsome

equipment to select directly channels higher than 9.

[16]A/V:Selectionofanexternalsource(SCARTinput).

[17] Play, FF, Stop, Rew, Pause:

 InVCR&DVDmode:Thesebuttonsworkthesamewayasin

your original remotes.

 InTVmode:Fasttextfunction(colouredkeys).

 REC(record):Thiskeyworksthesamewayastheoneonyour

originalremoteforyourVCR.Inordertoavoidamistakeyouhaveto

pressthiskeytwicetoactivatethisfeature.

4) Programming your TV, VCR, DVD and SAT modes

Note: You can dedicate any appliance (TV, DVD, SAT...) to the VCR,

DVD,orSATkeys:youjustneedtoenterthe4digitcode(foundin

thecodebook)oftheappliance,i.e.aVCRcodeundertheSATkey.

In any case, follow the steps below:

1. Makesureyourequipmentisswitchedon(forexampleTV).

2. PressandholdtheSETUP(4)keyuntiltheLEDindicator(1)lights

continuously.ReleasetheSETUPkey.

3. Pressandreleasethemodekey(3)ofthedeviceyouwantto

control (for example TV).

4. Enterthe4digitcode(13)fromtheCodeBook.TheLED(1)turns

off after the last digit is entered. If you entered a wrong code the LED

blinksfor3secondsandthengoesoff.Youhavetorepeatfromstep2.

5. Point the remote in the direction of your TV and press the POWER

button(2).Yourdeviceshouldturnoff.Checkotherfunctions(for

example for a VCR: FF or REW etc.). If certain functions are not

responding this indicates that the entered code is not the correct one.

In that case repeat the above procedure with the next corresponding

code of your brand.

6. Repeat this procedure from step 1 for the other equipment you want

to control (TV, VCR, DVD, SAT)

5) Manual code search

If your equipment (TV, SAT etc....) does not respond, try the other

codes for your brand. If it still doesn’t respond, try the Code Search

method.

Note: As you can dedicate any appliance (TV, DVD, SAT...) to the

VCR,DVDorSATkeys,youneedrsttoenterany4digitcodefor

thekindofapplianceyouwishtocontrol(foundinthecodebook),

i.e.:IfyouwanttoprogramaSATundertheVCRkey,enteranySAT

codefoundinthecodebookandthenfollowthestepsbelow:

1. Makesureyourequipmentisswitchedon.Ifnotswitchiton

manually.

2. Press and hold SETUP (4) until the LED indicator lights steadily.

Release SETUP

3. Pressthemodekey(3)thatmatchestheequipmentyouwantto

control (for example TV).

4. PressPROG+(7)repeatedlyuntilthePROGchanges.Ifyoustep

pastthecorrectcodeusePROG-(7)togobacktotherightcode.

5. When the equipment you want to control reacts press ENT (15) to

conrmthecode.That’sall.

Note:Ifyourequipmentdoesn’thavePROG+,youcanusePLAY

(VCRorDVD)(17)orPOWER(2)key.

The search starts after the last registered code. If that was 0030, the

search starts at 0031 until the last possible code and then goes from

0000 to 0029.

Note: if certain functions of your equipment can’t be controlled you

havetondadifferentcodeforyourbrand.

6) Automatic code search

Whensearchinganunknowncode,youcanstepthroughthelibrary

automatically (AutoSearch). When your equipment responds, you can

stop the searching process and store the code you found.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Emtec H140 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish as an attachment in your email.

The manual is 0,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Emtec H140 Manual

Product: