499693

Emtec H140 - EKCORC 4N1E Manual

6
Zoom out
Zoom in
Previous page
1/65
Next page
No need to select the TV mode.
 SHIFT+Volume+/-:menunavigationkeys,allowyoutonavigate
left and right into the menu of your appliances.
[9] Teletext MIX: Allows to mix the Teletext and the picture of the
selected channel.
[10]Mute:Allowsyoutoturnon/offthesound.Youcancontrolthe
«Mute» function of your TV even when you are in VCR, DVD or SAT
mode. No need to select the TV mode.
 SHIFT+Mute:OKkey,conrmstheselection.
[11] Teletext OFF:
TV mode: Stop Teletext.
 SHIFT+TeletextOFF:ExitMenu.
[12] Teletext Hold: Stop page change in Teletext mode.
[13]Numerickeys0-9:Workthesamewayasyouroriginalremote.
[14] Teletext ON:
 TVmode:Start/stopTeletext.
 SHIFT+TeletextON:MenuON.
[15] ENT: If you are in programming mode – automatic code
search-youcanconrmthecodeofthedeviceyouwanttocontrol.In
connectionwiththenumerickeys,thisbuttonallowsyouwithsome
equipment to select directly channels higher than 9.
[16]A/V:Selectionofanexternalsource(SCARTinput).
[17] Play, FF, Stop, Rew, Pause:
 InVCR&DVDmode:Thesebuttonsworkthesamewayasin
your original remotes.
 InTVmode:Fasttextfunction(colouredkeys).
 REC(record):Thiskeyworksthesamewayastheoneonyour
originalremoteforyourVCR.Inordertoavoidamistakeyouhaveto
pressthiskeytwicetoactivatethisfeature.
4) Programming your TV, VCR, DVD and SAT modes
Note: You can dedicate any appliance (TV, DVD, SAT...) to the VCR,
DVD,orSATkeys:youjustneedtoenterthe4digitcode(foundin
thecodebook)oftheappliance,i.e.aVCRcodeundertheSATkey.
In any case, follow the steps below:
1. Makesureyourequipmentisswitchedon(forexampleTV).
2. PressandholdtheSETUP(4)keyuntiltheLEDindicator(1)lights
continuously.ReleasetheSETUPkey.
3. Pressandreleasethemodekey(3)ofthedeviceyouwantto
control (for example TV).
4. Enterthe4digitcode(13)fromtheCodeBook.TheLED(1)turns
off after the last digit is entered. If you entered a wrong code the LED
blinksfor3secondsandthengoesoff.Youhavetorepeatfromstep2.
5. Point the remote in the direction of your TV and press the POWER
button(2).Yourdeviceshouldturnoff.Checkotherfunctions(for
example for a VCR: FF or REW etc.). If certain functions are not
responding this indicates that the entered code is not the correct one.
In that case repeat the above procedure with the next corresponding
code of your brand.
6. Repeat this procedure from step 1 for the other equipment you want
to control (TV, VCR, DVD, SAT)
5) Manual code search
If your equipment (TV, SAT etc....) does not respond, try the other
codes for your brand. If it still doesn’t respond, try the Code Search
method.
Note: As you can dedicate any appliance (TV, DVD, SAT...) to the
VCR,DVDorSATkeys,youneedrsttoenterany4digitcodefor
thekindofapplianceyouwishtocontrol(foundinthecodebook),
i.e.:IfyouwanttoprogramaSATundertheVCRkey,enteranySAT
codefoundinthecodebookandthenfollowthestepsbelow:
1. Makesureyourequipmentisswitchedon.Ifnotswitchiton
manually.
2. Press and hold SETUP (4) until the LED indicator lights steadily.
Release SETUP
3. Pressthemodekey(3)thatmatchestheequipmentyouwantto
control (for example TV).
4. PressPROG+(7)repeatedlyuntilthePROGchanges.Ifyoustep
pastthecorrectcodeusePROG-(7)togobacktotherightcode.
5. When the equipment you want to control reacts press ENT (15) to
conrmthecode.That’sall.
Note:Ifyourequipmentdoesn’thavePROG+,youcanusePLAY
(VCRorDVD)(17)orPOWER(2)key.
The search starts after the last registered code. If that was 0030, the
search starts at 0031 until the last possible code and then goes from
0000 to 0029.
Note: if certain functions of your equipment can’t be controlled you
havetondadifferentcodeforyourbrand.
6) Automatic code search
Whensearchinganunknowncode,youcanstepthroughthelibrary
automatically (AutoSearch). When your equipment responds, you can
stop the searching process and store the code you found.
GB
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emtec H140 - EKCORC 4N1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emtec H140 - EKCORC 4N1E in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info