Manual Emtec 4in1 (page 7 of 65) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish)

122716

Zoom out

Zoom in

1/65

Note: As you can dedicate any appliance (TV, DVD, SAT...) to the

VCR,DVDorSATkeys,youneedrsttoenterany4digitcodefor

thekindofapplianceyouwishtocontrol(foundinthecodebook,i.e.:

IfyouwanttoprogramaSATundertheVCRkey,enteranySATcode

foundinthecodebookandthenfollowthestepsbelow:

1. Turn on the device you want to control.

2. Press and hold SETUP (4) until the LED indicator (1) lights stea-

dily. Release SETUP button.

3. Press the mode button (3) that matches the equipment you wish to

control.TheLED(1)blinksonce.

4. PressPROG+(7)once.Afterafewsecondstheremotestarts

stepping through the code library (fast search, 1 code per second).

Whenthedeviceresponds,youcanpressPROG+(7)toswitchto

slowsearch(1codeper3seconds).Youcanstepbackbypressing

PROG-(7)(youcanstepforwardbypressingPROG+(7)incaseyou

wenttoofarback).Assoonasthedevicerespondsagain,pressthe

-ENTkey(15)tostorethecodeyoufound.

7) Brand search

If your brand is listed hereafter, you have the possibility to use the

brand search method (faster than the «manual» and the «automatic

code search»):

BRAND CODE

Philips/Radiola    1

Sony/Panasonic/JVC/SharpAkai/Toshiba/Daewoo 2

Thomson/Brandt    3

Telefunken/Saba/Normende   4

Grundig/Blaupunkt    5

Nokia/ITT     6

1. Turn on the device you want to control.

2. Press and hold SETUP (4) until the LED indicator (1) lights stea-

dily. Release SETUP button.

3. Pressthemodekey(3)thatmatchestheequipmentyouwantto

control (for example TV).

4. Enter the code corresponding to your brand, point the 4 in 1

Universal Remote Control in the direction of your equipment, press

onceonlyPROG+(7)continuetopointthe4in1UniversalRemote

Control at your equipment until the equipment changes channel. (The

remote control sends an IR signal every second. So please wait until

your equipment reacts). When your equipment does react, press on

thekeyENT(15)toconrm.Ifaccidentallyyoumissthecode,you

can stop the autosearch by pressing PROG – (7) and by repeatedly

pressingthiskeyreturntotherightcode.PressENT(15)toconrm.

8) Identifying codes found using the search procedure

1. Press and hold SETUP (4) until the LED indicator (1) lights stea-

dily. Release SETUP.

2. Pressthemodekey(4)fortheequipmentyouwanttoidentify(TV,

VCR,DVDorSAT).TheLEDblinksonce.

3. PressagainSETUP.TheLEDblinksonce.

4. Toidentifytherstdigitpresseachnumberbuttonfrom0–9(13)

untiltheLEDblinks.Thenumberyoupressedistherstdigitofthe

code.

5. Presseachnumberkeyfrom0–9asabovetondthesecondand

third digit.

7. Presseachnumberkeyfrom0–9asabovetondthefourthdigit.

When the fourth digit has been found the LED will go off. Don’t

forget to write down the code on the label of the battery compartment.

9) Volume Control

AdjustmentofALLvolumecontrolsunderaspecicmode

You can program the remote control so that the volume and mute

keyscontrolaspecicdevice(thevolumecontrolmustexistonthe

corresponding device). E.g. control of TV sound in TV mode, VCR

mode and SAT mode.

1. Press and hold SETUP (4) until the LED indicator (1) lights stea-

dily. Release SETUP.

2. PressandholdMUTE(10)untiltheLED(1)blinksonce.Release

MUTE.

3. Pressonceonthemodekey(TV,SAT,…)correspondingtothe

device whose volume will always be controlled by the VOL (8) and

MUTE(10)keys.

4. PresstheMUTE(10)keyonce.

Adjustment of the volume controls for EACH mode.

You can program the remote control so that the volume control is

functional for each mode selected (the volume control must exist on

the corresponding device). E.g. control of the television set sound in

TV mode, control of the SAT receiver sound in SAT mode,...

1. Press and hold SETUP (4) until the LED indicator (1) lights stea-

dily. Release SETUP.

2. PressandholdMUTE(10)untiltheLED(1)blinksonce.Release

MUTE.

3. Pressonceonthemodekey(TV,VCR,…)correspondingtothe

device whose volume will always be controlled by the VOL (8) and

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Emtec 4in1 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish as an attachment in your email.

The manual is 0,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Emtec 4in1 Manual

Product: