39
You can set 2 different alarm limits: Alarm stage 1 and Alarm stage 2. The setting
is configured in percentage points of a fully charged battery. If the low
battery alarm is enabled and the battery capacity undershoots the specified
limit, an alarm SMS is sent automatically to the aid organisation.
Note: in order to be able to configure the setting described here, you need the
phone code. This is preconfigured: 1234
8.2.5 Geo-fence (Zone Alarm)
Note: This feature can be used only if you are associated with an aid
organisation that supports this feature, or with the emporia4CARE platform,
which is free of charge. (See chapter 8.2.1 on page 32)
Your emporiaCAREplus has the feature of making an emergency call to
predefined recipients if the device leaves a predetermined radius. This is
possible with the help of satellite-supported GPS.
Under SOS / Geo-fence / Zone alarm you can switch Geo-fence on or off. If
the zone alarm is switched on, you can specify how often data should be
retrieved from the GPS satellite.
– Under Set zone you can specify the starting point.
For manual input, select: Enter coordinates
or automatically with Instantaneous position.
– Under Radius you can enter the number of metres.
If the predefined radius is exceeded by the mobile phone user, an alarm is
triggered automatically.
Note: The GPS consumes high power when it is switched on and thus, reduces
the operating time of the mobile phone with continuous operation from 360
to 24hours.
Note: in order to be able to configure the setting described here, you need the
phone code. This is preconfigured: 1234
