Manual Empisal S4D (page 23 of 32) (English)

682496

Zoom out

Zoom in

1/32

- 22 -

FREE ARM SEWING

Remove the support bed as illustrated which easily converts from a flat bed to free arm.

Convenient for sewing pant legs, sleeves and cuffs, etc.

CONVERTIBLE PRESSER FOOT

The special presser foot, is set for normal overlock

with the letter N adjacent to the vertical screw at front

of presser foot. When you need to sew a rolled edge,

simply loosen the large screw slightly and move the

finger that protrudes from left side of foot forward until

is stops, then re-tighten the screw. The letter R will

now be adjacent to screw.

Free arm

Support bed

Finger

My overlocker is breaking threads what might be the possible cause
Submitted on 27-7-2022 at 20:53
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Empisal S4D in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Empisal S4D Manual

Product: