682496
11
Zoom out
Zoom in
Previous page
1/32
Next page
- 10 -
LOOPER THREADING
Warning: Before contriving please adjust main control switch to (O).
Correct threading is important otherwise uneven stitches or thread breakage may result.
A convenient threading chart is placed on the front panel inside the front cover.
In addition, each thread guide is colored for
threading indication.
To help in threading, tweezers can be found in
the accessory box.
Threading must be carried out in the following
sequence.
1. FIRST……...Upper looper
2. SECOND…..Lower looper
3. THIRD……...Right needle
4. FINALLY……Left needle
1. Open the front cover and free arm.
2. Turn the handwheel toward you until. the
looper comes to best position for threading.
3. Pass the upper looper thread and lower
looper thread as illustrated.
Important: The thread must lie correctly
between the two discs inside the tension
dials.
4. Pull out the thread end about 10 cm (4")
long from the looper eyes. Raise the presser
foot and place threads under it, then lower
the presser foot.
Upper looper thread Lower looper thread
2
2
1
1
Thread between two discs
4
4
4
5
6
8
4
9
11
3
7
2
8
5
2
3
4
6
7
10
5
6
7
8
4
9
10
11
8
7
6
5
5
Lower looper
Upper looper
11


Need help? Post your question in this forum.

Forumrules
1

Forum

empisal-s4d

Reset search

  • My overlocker is breaking threads what might be the possible cause
    Submitted on 27-7-2022 at 20:53

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Empisal S4D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Empisal S4D in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info