682501
7
Zoom out
Zoom in
Previous page
1/13
Next page
7
USING THE DIGITAL FABRIC STEAM PRESS
FILLING WATER RESERVOIR
1. Place Digital Fabric Steam Press on a flat, level surface.
2. Turn Locking Knob to Unlock position to unlock Pressing Plate.
3. Lift up Pressing Plate using Handle. It will automatically stay in lifted position.
4. Pull Water Reservoir out. Note that the Water Reservoir cannot be completely
removed from unit; do not attempt to force it free.
5. Remove Water Reservoir Cap to expose Water Reservoir fill hole.
6. Using Measuring Cup (included) fill Water Reservoir up to the MAX (300nl) line
with distilled water.
7. Replace Water Reservoir Cap and push filled Water Reservoir back into main
unit.
OPERATING DIGITAL FABRIC STEAM PRESS
1. With Pressing Plate in lifted position, plug power cord into electrical outlet, and
set On/Off Switch to On position (FIGURE1)
2. Identify type of fabric you are going to press,
and select corresponding temperature setting
using Temperature Control Buttons. Note that it is
best to start with the most delicate fabrics
first, as higher level of heat will cause damage
to Nylon and Silk. Pressing Indicator Light will
illuminate.
3. A few minutes of heating time will be required to reach selected temperature.
Once Pressing Plate is heated, Pressing Indicator Light will deactivate. You are
now ready to begin pressing.
4. Lay fabric flat on Ironing Board
5. If pressing wool, you may choose to spray with a burst of steam. This function is
available once Steam Burst Ready Indicator Light illuminates.
NOTE: Do not activate burst of steam with unit completely closed, as this may
damage unit. Best results are obtained if Pressing Plate is held open
approximately 75mm above Ironing Board before pressing Steam Burst Button.
For safety reasons, do not hold Pressing Plate open more than 75 mm when using
steam burst function.
6. To press, lower Pressing Plate gently onto fabric and Ironing Board. Hold there
for 8-10 seconds, and then lift up Pressing Plate. Repeat until you have achieved
desired crease and smoothness. See page 8 of this manual for more specific
pressing tips.
7. Once pressing tasks are complete, immediately set On/Off Switch to Off
position. Refer to page 9 of this manual for further information about cleaning
and storage of Digital Fabric Steam Press.
FIGURE 1
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Empisal EIP003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Empisal EIP003 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info