682494
51
Zoom out
Zoom in
Previous page
1/82
Next page
46
Zipper
insertion
This foot can be set to sew on each side of the zipper, the The edge of the foot guides
the
zipper to ensure
straight placement.
1
I
3.5 1.5~3.0
5mm
Attention:
Zipper foot should be used for sewing width
center needle position straight stitch only. It
is possible that needle could hit the presser
foot and break when sewing other patterns.
Inserting
a centered
zipper
1
Place the right sides of the fabric together.
Sew a bottom seam 2cm from the right edge
Reverse
stitches
Basting
stitching
Reverse
side
Basting
stitching
Reverse
side
to the zipper bottom stop position. Sew a
few stitches in reverse to lock. Increase the
stitch length to maximum, set the tension
below 2, and baste the remaining length of
the fabric.
2
Press open the seam allowance. Place the
zipper face down on the seam allowance
with the teeth against the seam line. Baste
the zipper tape.
1
2cm
2
3
Attach the zipper foot. Attach the right side
of the presser foot pin to the holder when
sewing the left side of the zipper.
4
Attach the left side of the presser foot pin to
the presser foot holder when sewing the
right side of the zipper.
3
4
5
Stitching around the zipper.
Please
Note:
When sewing, be sure that the needle does
not touch the zipper, otherwise the needle
may bend or break.
6
Remove the basting and press.
5
6
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Empisal EES50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Empisal EES50 in the language / languages: English as an attachment in your email.

The manual is 6,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info