682497
32
Zoom out
Zoom in
Previous page
1/35
Next page
31
CHECKING PERFORMANCE PROBLEMS TROUBLESHOOTING
Problem
Probable cause
What to do
Fabric does not
move
- Feed teeth down
- Raise feed teeth
Breaking needle
- Incorrect insertion of needle
- Bent needle
- Fabric is being pulled
- Needle, thread and fabric do
not match
- Re-insert needle
- Replace needle
- Do not pull fabric
- Use correct needle and thread
Breaking upper
thread
- Faulty adjustment of zigzag
width
- Improper threading
- Tight upper thread tension
- Bent needle
- Scratches or nicks on bobbin
case
- Re-adjust zigzag width
- Re-thread machine
- Reduce upper thread tension
- Replace needle
- Polish or replace bobbin case
Breaking bobbin
thread
- Tight bobbin thread tension
- Incorrect insertion of needle
- Improper threading
- Lint or thread in bobbin case
- Reduce bobbin thread tension
- Re-insert needle
- Rethread machine
- Clean bobbin case
Machine
jamming
- Excessive tension
- Needle, thread and fabric do
not match
- No oil
- Re-adjust tension
- Reduce proper needle and
thread according to type of
fabric
- Oil moving parts
Puckering
- Tension too tight
- Incorrect fabric, needle,
and thread
- Reset
- Use correct fabric, needle
and thread
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Empisal Dressmaker 120A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Empisal Dressmaker 120A in the language / languages: English as an attachment in your email.

The manual is 11,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info