Manual Empisal Companion 7D (page 17 of 32) (English)

682506

Zoom out

Zoom in

1/32

- 16 -

CHANGING THE THREAD (TYING ON)

It is simple to change the thread in the following

manner.

Cut the thread above the spool pin, and knot

ends of old and new threads together.

Set the tension dials to "O" and raise the

presser foot.

Pull the other end of thread until knots come

under the presser foot. For needle threads, pull

the other ends of threads until knots come to

needle eyes and cut the threads at the both

sides of the knots. Then re-thread the needles.

BUILT-IN POCKET HANDLE

The Built in pocket handle is a convenient way

to carry your machine.

Pocket handle

The tread is correctly inserted. The stitching does not form correctly. I think that the syncronising might be incorrect. May I have a video that shows the detail of the syncronising of the needle and the bloopers, while stitching? Submitted on 3-1-2024 at 10:09
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Empisal Companion 7D in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Empisal Companion 7D Manual

Product: