Manual Emphaser ea 4150 d (page 15 of 32) (English, German, French)

168128

Zoom out

Zoom in

1/32

ADJUSTMENT OF THE INPUT GAIN CONTROLS

To reach a maximum in dynamic response from each individual head-unit/amplifier/speaker combi-

nation, it is important to set the respective input sensitivity controls („GAIN“) of all channel pairs cor-

rectly. Before you start, you MUST set all tone controls (Bass, Mid, Treble, Loudness etc.) and the fader

on the head unit to their neutral or center positions.

Now turn all input gain controls of the installed amplifiers anti-clockwise to their minimum positions.

Always start the adjustment with the channel pair, that drives the subwoofer system!. The REMOTE

LOW PASS LEVEL BOOST – if installed in your system configuration - shall be set to a middle posi-

tion, so there is headroom for adjustments using the remote control.

SUBWOOFER CHANNEL

Set the volume control of your head-unit to approximately – of full volume, while playing a dynamic

piece of music. Slowly increase the input gain control of the channel pair, that drives the subwoofer(s),

by turning the GAIN control clockwise until you can just about hear distorted sounds coming out of

your subwoofer system. Reduce the main volume level on your head-unit to a medium listening level.

SATELLITE CHANNELS

Slowly increase the input gain control of the channel pair, that drives the satellite system, by turning

the GAIN control clockwise until you reach a good tonal balance, with a slight emphasis of the bass

range. Aim at a full bodied bass response.

REMAINING CHANNELS

Now slowly turn up the input GAIN control of the remaining channel pair (if any), until you have rea-

ched a good tonal balance. A front door installed kickbass system or a subwoofer will sound best, if

the input gain is set to render slight emphasis in the bass range, as this emphasis will be compensa-

ted by normal driving noises.

PHASE SHIFT CONTROL

The phase shift control provides you with a simple “tool” to match the front door installed satellite

system with the subwoofer playing in the trunk compartment of your car. The phase shift control is used

to improve the match of the phase (time) relation between the front door installed satellite system to the

subwoofer playing in the trunk.

The assistance of somebody adjusting the phase shift control in the back of your car, while you moni-

tor the change of sound in the upper bass range sitting on the on the drivers seat is recommended. A

good match of the phase relation between subwoofer and satellite system will give you a harder hit-

ting upper bass range, and the subwoofer seems to play upfront – and not in the trunk of your car.

EM Digital 4/5-CH Manual 2004 26.03.2004 11:39 Uhr Seite 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Emphaser ea 4150 d in the language / languages: English, German, French as an attachment in your email.

The manual is 0,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Emphaser ea 4150 d Manual

Product: