784685

EMOS SELECT 9010 Manual

18
Zoom out
Zoom in
Previous page
1/219
Next page
18
FIRMWARE UPDATE
The console supports OTA rmware update capability. Its rmware may be updated over
the air anytime (whenever necessary) through any web-browser on a PC / Mac with WI-FI
connectivity. Update function, however, is not available through mobile/smart devices.
Upload
Browse
Firmware version: 1.00
Current rmware
version
Bottom of web interface ADVANCED page
Press to start upload the rmware
to console
Please to select the rmware le for
update
FIRMWARE UPDATE STEP
1. Download the latest version rmware to your PC / Mac.
2. Set the Console into AP (access point) mode then connect the PC / Mac to the console (ref
to "SETUP WI-FI CONNECTION" section in previous page).
3. Click the Browse in rmware update section and browse the location of the le you
download in step 1. To update the WI-FI rmware, click the Browse in WI-FI rmware
section.
4. Click the corresponding Upload to start transfer the rmware le to console.
5. In the meantime, the console will execute the update
automatically and will show the update progress on display (i.e.
100 is completion).
The update time is around 5 ~ 8 minutes
6. The console will restart once the update is completed.
7. The console will stay in AP mode for you to check the rmware version and all the current
setting.
IMPORTANT NOTE:
- Please keep connecting the power during the rmware update process.
- Please make sure your PC / Mac's WI-FI connection is stable.
- When the update process start, do not operate the PC / Mac and console until the update
nished.
- During rmware update the console will stop upload data to the cloud server. It will reconnect
to your WI-FI router and upload the data again once the rmware update succeed. If the
console cannot connect to your router, please enter the SETUP page to setup again.
- After the rmware update, If the setup informations are missing, please input the setup
information again.
- Firmware update process have potectial risk, which cannot guarantee 100% success. If the
update fail, please redo the above step to update again.
OTHER SETTING & FUNCTIONS OF THE CONSOLE
MANUAL CLOCK SETTING
This console is designed to obtain the UTC time by synchronize with the assigned internet time
server. If you want to use it ofine, you can set the time and date manually. During the rst time
startup, press and hold the [ SENSOR / WI-FI ] key for 6 seconds and let the console back to
normal mode.
1. In normal mode, press and hold [ CLOCK SET ] key for 2 seconds to enter setting.
2. The setting sequence: DST AUTO/OFF Hour Minute second 12/24 hour
format Year Month Day M-D/D-M format Time sync ON/OFF weekday
Language.
3. Press [ ] or [ ] key to change the value. Press and hold the key for quick-adjust.
4. Press [ CLOCK SET ] key to save and exit the setting mode, or the unit will automatically
exit the setting mode 60 seconds later without pressing any key.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EMOS SELECT 9010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EMOS SELECT 9010 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info