562645
14
Zoom out
Zoom in
Previous page
1/52
Next page
14
|
ENGLISH
7.3 Setting up sound
Hint: If the HDMI Output is set to ‘Auto’, the media player will automatically use the
correct settings. When using the ‘Auto’ function, there is no need for manual settings.
7.3.1 If connected directly to your television:
1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.
2. Select ‘Audio’.
3. The first option displayed is the ‘Preferred audio language’ here you can set what
audio language the EM7480/EM7485 should start to use (if available).
4. If the media player will be used mainly during night-time, the ‘Night Mode’ can be
set to ‘ON’ or ‘Auto’. When set to ‘On’, low-level audio content such as dialog will
be increased making it easier to hear at low volume levels. When set to ‘Auto’, the
intensity of higher-level audio content will also be reduced.
5. Make sure the ‘HDMI Output’ is set to ‘LPCM’ and press the ‘OK’ button.
6. Select ‘Surround Sound’ and press the ‘OK’ button. Select ‘undefined’, ‘5.1 CH’
and press the ‘OK’ button.
7. The last item is ‘Lip Sync’. Usually, ‘AUTO’ is the default setting and is the
recommended setting. Only set the ‘Lip Sync’ option if you experience delay in
audio playback. The maximum setting for lip sync is 500.
7.3.2 If connected to a HDMI audio receiver:
Refer to the manual of your HDMI receiver to make sure which codecs are supported.
The steps shown are default settings and are normally useable for a HDMI receiver.
1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.
2. Select ‘Audio’.
3. The first option displayed is the ‘Preferred audio language’ here you can set what
audio language the EM7480/EM7485 should start to use (if available).
4. If the media player will be used mainly during night-time, the ‘Night Mode’ can be
set to ‘ON’ or ‘Auto’. When set to ‘On’, low-level audio content such as dialog will
be increased making it easier to hear at low volume levels. When set to ‘Auto’, the
intensity of higher-level audio content will also be reduced.
5. Set ‘HDMI Output’ to ‘RAW’ and press the ‘OK’ button.
6. Select ‘Surround Sound’ and press the ‘OK’ button. If your HDMI receiver supports
‘Dolby True HD’, select ‘HD Audio’. If your HDMI receiver does not support ‘Dolby
True HD’, select ‘5.1 CH’ or ‘Undefined’.
7. The last item is ‘Lip Sync’. Usually, ‘AUTO’ is the default setting and is the
recommended setting. Only set the ‘Lip Sync’ option if you experience delay in
audio playback. The maximum setting for lip sync is 500. However, most HDMI
receivers also have a ‘Lip Sync’ option. It is advisable to use the lip sync option on
the receiver, since most receivers are able to delay and speed up the sound.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM7485 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM7485 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eminent EM7485

Eminent EM7485 Quick start guide - English, German - 2 pages

Eminent EM7485 User Manual - German - 55 pages

Eminent EM7485 Quick start guide - Dutch - 2 pages

Eminent EM7485 User Manual - Dutch - 54 pages

Eminent EM7485 Quick start guide - French - 2 pages

Eminent EM7485 User Manual - French - 55 pages

Eminent EM7485 Quick start guide - Italian, Polish, Portuguese, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info