461812
9
Zoom out
Zoom in
Previous page
1/25
Next page
9
|
ENGLISH
Refer to the manual of your HDMI receiver to make sure which codecs are supported.
The steps shown are default settings and are normally useable for a HDMI receiver.
1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.
2. Select ‘Audio’.
3. If the media player will be used mainly during night-time, the ‘Night Mode’ can be
set to ‘ON’ or ‘Comfort’. This way, low-level audio content such as dialog will be
increased making it easier to hear at low volume levels. At the same time, the
intensity of higher-level audio content will be reduced.
4. Select ‘Surround Sound’ and press the ‘OK’ button. If your HDMI receiver
supports ‘Dolby True HD’, select ‘TrueHD’. If your HDMI receiver does not
support ‘Dolby True HD’, select ‘5.1CH’.
5. Select ‘Digital Output’ and press the ‘OK’ button. Set ‘Digital Output’ to ‘HDMI
RAW’.
6. ‘Advance Setup’ is set to ‘On’ by default. If this setting is not set to ‘On’, press the
‘OK’ button and select ‘ON’.
7. Select ‘AC3 Output’ and press the ‘OK’ button. Set ‘AC3 Output’ to ‘HDMI RAW’.
8. Select ‘DTS Output’ and press the ‘OK’ button. Set ‘DTS Output’ to ‘HDMI RAW’.
9. Select ‘AAC Output’ and press the ‘OK’ button. Set ‘AAC Output’ to ‘HDMI LPCM’
or ‘HDMI LPCM Multi CH’ if you want to hear the sound using all available
speakers.
7.3.3 If connected to a DTS receiver using the coaxial or optical connection:
1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.
2. Select ‘Audio’.
3. If the media player will be used mainly during night-time, the ‘Night Mode’ can be
set to ‘ON’ or ‘Comfort’. This way, low-level audio content such as dialog will be
increased making it easier to hear at low volume levels. At the same time, the
intensity of higher-level audio content will be reduced.
4. Select ‘Surround Sound’ and press the ‘OK’ button. Select ‘5.1CH’.
5. Select ‘Digital Output’ and press the ‘OK’ button. Set ‘Digital Output’ to ‘S/PDIF
RAW’. Set ‘Digital Output’ to ‘S/PDIF LPCM’ if your receiver does not support raw
AC3 codecs.
6. ‘Advance Setup’ is set to ‘On’ by default. If this setting is not set to to ‘On’, press
the ‘OK’ button and select ‘ON’.
7. Select ‘AC3 Output’ and press the ‘OK’ button. Set ‘AC3 Output’ to ‘S/PDIF
RAW’.
8. Select ‘DTS Output’ and press the ‘OK’ button. Set ‘DTS Output’ to ‘S/PDIF
RAW’.
9. Select ‘AAC Output’ and press the ‘OK’ button. Set ‘AAC Output’ to ‘S/PDIF
LPCM’.
7.4 Setting up the network
During the wizard, the initial network setup was available. The network settings can be
changed afterwards if necessary. Also, it is possible to connect a wireless USB dongle
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM7280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM7280 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eminent EM7280

Eminent EM7280 User Manual - German - 28 pages

Eminent EM7280 User Manual - Dutch - 26 pages

Eminent EM7280 User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info