612423

Eminent EM7100 Manual

7
Zoom out
Zoom in
Previous page
1/10
Next page
7 |
ENGLISH
4. Press ‘HDMI 2’ if you want to switch to the second HDMI device.
5. Press ‘Component’ if you are using component cables.
6. Press ‘AV’ if you are using SCART or composite to SCART cables.
5.0 Connecting a digital receiver (HDMI only)
Since the EM7100 receiver unit is equipped with a HDMI-OUT connection, it is also
possible to connect a digital receiver to the EM7100 receiver unit. This is ideal if the
digital receiver is equipped with a surround sound system.
1. Connect the HDMI cable to the ‘HDMI-OUT’ connection of the EM7100 receiver
unit.
2. Connect the other side of the HDMI cable to the HDMI input connection of your
digital receiver.
3. If correct, your digital receiver is also equipped with a HDMI output. Connect
another HDMI cable to the HDMI output connection of your digital receiver.
4. Connect the other side of this HDMI cable to the HDMI connection of your
television.
5. The television should now be able to display the main menu of your media player
or media device while your digital receiver can use the digital signals for the
(surround) sound system.
6.0 Frequently asked questions
Q: The EM7100 wireless receiver is equipped with a HDMI Out port. Which
sound formats are supported?
A: The EM7100 has HDMI 1.1 compliant HDMI ports. This means DTS 5.1 and
AC3 5.1 are supported streams. However, bear in mind that you need a
(certified) digital DTS receiver to playback DTS sound streams (if your
media player or media device cannot decode DTS to PCM sound). In some
cases you need to setup the media player or media device to use the DTS
or AC3 sound system. Refer to the manual of you media player or media
device.
Q: I do have other wireless N devices in my house. It seems the wireless signal
of the EM7100 is not sufficient enough to stream my HD content. Is it
possible to change the wireless signal of the EM7100 in order to prevent my
other wireless N devices interfering the wireless signal of the EM7100?
A: Yes. It is possible to change the wireless channel of the EM7100: Press the
‘WiFi CH 1/WiFi CH 2’ button on the remote control for approximately 5
seconds. The wireless channel will be changed and the EM7100 system
will be rebooted.
Q: How can I reset the EM7100?
Downloaded from www.Manualslib.com manuals search engine
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM7100 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info