3. Open de behuizing van het tafelarm door de achterkant los te draaien (met de klok mee). U ziet
daarna het volgende:
4. Druk 1x op de aanmeldknop (zie witte cirkel). De groene LED zal snel gaan knipperen, om aan te
geven dat de zender herkend is door de alarmontvanger.
5. Druk wederom 1x op de knop waarmee de verbinding opgeslagen wordt. De rode en groene LED
lichten samen 2 seconden op.
6. De groene LED gaat daarna weer rustig knipperen, om aan te geven dat de alarmontvanger gereed
is om meer zenders in te leren.
7. Herhaal eventueel de stappen 3 en 4 om meerdere tafelalarm knoppen in te leren.
8. Houdt de aanmeldknop 2 seconden ingedrukt en laat deze daarna los om de leermodus te stoppen.
Tafelalarm testen/gebruiken
Het tafelalarm is nu klaar voor gebruik. Naar wens kunt u het persoonsalarm testen door op de alarm
knop te drukken. De knop zal daarna trillen en een piep laten horen.
3. Open the housing of the table alarm, by rotating the back panel clockwise. You will see the
following:
4. Press the learn button 1 time (see white circle). The green LED of the alarm receiver will blink
rapidly to indicate that the transmitter has been recognized.
5. Press the learn button 1 time to store the wireless connection. Both the red and green LED lit up
for 2 seconds.
6. The green LED will blink normally again to indicate that the alarm receiver is ready to include more
transmitters.
7. Repeat steps 3 and 4 to include more table alarm buttons.
8. Press the include button on the alarm receiver for 2 seconds again to end the learn mode..
Testing and using the table alarm button
The emergency table alarm button is ready to use. At your desire you can test the personal alarm by
pulling the cord. The button will vibrate and beep
Support
Find more support on our website (online manuals, instruction videos, download, examples etc.). Scan the QR code or go to:
http://www.e-domotica.com/en/customer-service
Ga naar onze website voor meer ondersteuning (online uitgebreide handleidingen, instructie video’s, downloads, voorbeelden etc.). Scan de QR code of ga
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Eminent EM6644 e-Domotica at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Eminent EM6644 e-Domotica in the language / languages: English, Dutch as an attachment in your email.
The manual is 0,09 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
