EM6640 e-Domotica Wireless Emergency Pendant Button / Draadloze Noodoproep Knop
www.e-domotica.com
Installatie van de alarmontvanger
1. Schroef de bovenkant los van de bodemplaat van de (2 schroeven).
2. Markeer met behulp van de bodem en een stift of potlood twee gewenste
boorgaten.
3. Indien de alarmontvanger aan een betonnen wand wordt gemonteerd: Boor met
een 6mm boor twee gaten van ruim 5cm diepte in de wand. Steek daarna de
bijgeleverde pluggen in de gaten
4. Bevestig de bodemplaat met de schroeven aan de muur.
5. Zet de bovenkant weer op de bodemplaat. Haal de bovenkant over de twee
nokjes van de bodemplaat en schroef deze vast met de twee schroeven.
6. Sluit de voedingskabel van de adapter aan op de rechter RJ12 ingang (zie afbeelding).
7. Sluit de datakabel aan op de linker RJ12 ingang. Dit is het potentiaalvrije signaleringsrelais. Sluit de
NO draad (Normally Open, rood) en de COM draad (common, zwart) aan op de witte potentiaalvrije
contacten van de EM6515. De groene draad en gele draad worden in deze situatie niet gebruikt.
Let op! Het potentiaalvrije signaleringsrelais is NIET geschikt om 230V netspanning te schakelen.
Noodoproep knop gebruiken
De noodoproep knop is in de verpakking al aangemeld op de alarm ontvanger en kan op verschillende
manieren gebruikt worden:
•De noodoproep knop is standaard uitgerust met een koord om deze als medaillon te gebruiken. Het
koord is instelbaar en beveiligd tegen verstikking (veiligheidsslot).
•Dankzij de clip aan de achterzijde van de noodoproep knop, kan de knop ook aan kleding
vastgemaakt worden.
•Haal de achterkant van de noodoproep knop los en gebruik de polsband om de noodoproep knop
aan de pols te gebruiken. De polsband is instelbaar dankzij de flexibele band.
Installing the alarm receiver
1. Unscrew the (top) cover of the alarm receiver (2 screws).
2. Mark the desired drill holes using the bottom part and a marker or pencil.
3. If you need to mount the alarm receiver on a concrete wall: Drill two holes with
5cm depth using a 6mm drill. Next, plug in the dowels.
4. Mount the bottom part to the wall using the screws.
5. Mount the (top) cover onto the bottom part. Use the two notches on the top side
to mount it correctly. Screw both parts together with the two screws.
6. Connect the power supply (adapter) onto the right hand sided RJ12 socket.
7. Connect the data cable to the left hand sided RJ12 socket. This is a potential
free signal relay. Connect the NO wire (Normally open, red) and the COM wire (common, black) to
the white potential free wires of the EM6515. The green and yellow wires are not used in this
situation.
Note! The potential free signal relay is not suitable to switch 230V mains power.
Using the Emergency Pendant
The emergency pendant button is connected wirelessly to the alarm receiver inside the giftbox, you can
use the pendant button in several manners:
•By default, the emergency button is equipped with a cord to use as a pendant around your neck.
The cord adjustable and protected against suffocation (safety lock).
•Use the clip on the back side to attach the emergency button to your clothing.
•Remove the back panel of the button and use the wrist band to use the button around your wrist.
You can adjust the wrist band because it is flexible.
Support
Find more support on our website (online advanced manuals, instruction videos, download, examples etc.). Scan the QR code or go to:
http://www.e-domotica.com/en/customer-service
Ga naar onze website voor meer ondersteuning (online uitgebreide handleidingen, instructie video’s, downloads, voorbeelden etc.). Scan de QR code of ga
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Eminent EM6640 e-Domotica at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Eminent EM6640 e-Domotica in the language / languages: English, Dutch as an attachment in your email.
The manual is 0,1 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
