499620
9
Zoom out
Zoom in
Previous page
1/12
Next page
9 | ENGLISH
Make sure that the roller shutter push button is properly attached to the insert.
The roller shutter cannot be operated using the transmitter button
Make sure that the maximum range is not exceeded and that there are no metal
surfaces such as metal cabinets or similar in the radio transmission path.
Check that the battery is placed correctly in the push button and that it is not flat.
7.1 Resetting the roller shutter push button to the factory
settings
Under certain circumstances, it may be necessary to reset the roller shutter push
button (and, as the case may be, the other devices in the e-Domotica system) to its
factory settings and to reconfigure the e-Domotica system:
1. Press any button on the roller shutter push button three times within approx. 1.5
seconds. The connected roller shutter motor starts up briefly.
2. Then press and hold the button for approx. five seconds until the shutter rolls
upwards. The roller shutter push button has been reset to its factory settings.
Caution, danger of trapping a finger, clothes, etc.
Make sure that the area in which the roller shutter is going to move is not obstructed
and that no-one can get caught in it.
Caution:
When you reset to the factory settings, all the settings and connections for this device
are lost. The e-Domotica system may no longer work and will need to be reconfigured.
8.0 Frequently Asked Questions
The latest frequently asked questions for your product can be found on the support
page of your product. Eminent will update these pages frequently to assure you have
the most recent information. Visit www.e-domotica.com/support/faqs for more
information about your product.
9.0 Service and support
This users manual has been carefully written by Eminent’s technical experts. If you
have problems installing or using the product, please fill out the support form at the
website www.e-domotica.com/support/customer-service
You can also contact us by phone. Below you will find a list with phone numbers for
each supported country.
Country Phone number Rate per minute*
Belgium (Dutch) 070 277 286 0.30
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM6630 e-Domotica at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM6630 e-Domotica in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eminent EM6630 e-Domotica

Eminent EM6630 e-Domotica User Manual - German - 12 pages

Eminent EM6630 e-Domotica User Manual - Dutch - 12 pages

Eminent EM6630 e-Domotica User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info