499604
44
Zoom out
Zoom in
Previous page
1/47
Next page
44 | ENGLISH
4. If a backup has been saved earlier, the date and time of the backup file will be
displayed.
5. Click on the ‘Restore’ button to continue.
6. Click ‘OK’
7. Wait until the e-Centre has been rebooted. This might take a few minutes.
8.0 Reset your e-Centre 2 to factory defaults
If problems have occurred during the installation or use of the e-Centre 2, you might
need to reset the e-Centre 2 back to the factory settings to start over again. You can
do this by following these steps.
1. Make sure that the e-Centre 2 is connected to your network with a network cable
2. Make sure that the power adapter is connected and the e-Centre 2 is on.
3. Start-up your computer.
4. Open a web browser like Firefox, Chrome or Internet Explorer.
5. Empty the address bar and go to http://ecentre/ or open the IP address of the e-
Centre 2.
6. Click on the Settings link on the bottom of the page.
7. Click on the Reset button on the page.
8. Click OK to continue.
9. The e-Centre 2 is now reset to factory settings. Note that this might take a few
minutes, and the e-Centre 2 will reboot automatically.
10. Once the home screen is visible again, the procedure is finished.
Note! You might need to remove (exclude) all Z-wave products first before you can
add (include) them again to the e-Centre 2.
9.0 Frequently Asked Questions
Q: I cannot open the local webpage of the e-Centre 2 using http://ecentre
A: Check the following:
Check if the network cable is connected to both your network (modem
or router) and your e-Centre 2.
Check if both your network (modem or router) and your e-Centre 2 are
powered. If so, you should see a blinking network light on your modem
or router
Check if your e-Centre 2 has received an IP address. Touch the
Settings button on the home screen, touch the View button of Network
Information.
Alternatively you can open the webpage of the e-Centre using the
mentioned IP address. For example, if the mention IP address is
192.168.1.30, you can enter “http://192.168.1.30” in the address bar of
your browser.
Check if your computer is connected to the same network (wired or
wireless)
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM6505 - e-Domotica e-Centre 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM6505 - e-Domotica e-Centre 2 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eminent EM6505 - e-Domotica e-Centre 2

Eminent EM6505 - e-Domotica e-Centre 2 User Manual - German - 52 pages

Eminent EM6505 - e-Domotica e-Centre 2 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info