499604
34
Zoom out
Zoom in
Previous page
1/47
Next page
34 | ENGLISH
5.1.1 Settings window
The Devices window will also show a button called ‘Settings’. Press this button to set
the backlight or volume level and to see specific information about this unit and
network information.
5.1.1.1 Change backlight
If you want to change the brightness of the backlight of the touch screen, press on the
backlight bar. Press on the left part to decrease the backlight, press on the right part to
increase the backlight.
5.1.1.2 Change volume
If you want to change the volume of the sounds and alarms the e-Centre is producing,
press on the volume bar. Press on the left part to decrease the volume, press on the
right part to increase the volume.
5.1.1.3 Device information and network information
The following information is available on this window:
Hostname: This is used in the http://ecentre/ address to access the e-Centre 2
Status: To tell you if the e-Centre 2 is connected to the e-Domotica Portal or not
IP address: This is the IP address from the wired connection of the e-Centre 2.
MAC Address: This is a unique MAC address of the wired connection of the e-
Centre 2. If you use MAC address filtering in your network, you might need to
add this MAC address to allowed devices in your network.
IP Address wireless: This will show the IP-address of the e-Centre 2 received
when a wireless connection is established.
Once a wireless connection is established, you will also see ‘Signal Strength:
with a percentage of the signal.
MAC Address wireless: This is a unique MAC address of the wireless connection
of the e-Centre 2. If you use MAC address filtering in your network, you might
need to add this MAC address to allowed devices in your network.
Hardware version: This is the hardware ID of your e-Centre 2.
Serial number: This is a unique serial number of the e-Centre 2.
Software version: This shows the date and version number of the software
currently used in the e-Centre 2
Z-wave version: This shows the current Z-wave version used in the e-Centre 2.
5.2 Information window
The Information window can show the icons for energy measuring devices, for
example the EM6601 e-Domotica Energy Reader or the EM6552 e-Domotica On/Off
Switch with Energy Metering function. Press on ‘Information’ to see the following
window on your e-Centre screen.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM6505 - e-Domotica e-Centre 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM6505 - e-Domotica e-Centre 2 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eminent EM6505 - e-Domotica e-Centre 2

Eminent EM6505 - e-Domotica e-Centre 2 User Manual - German - 52 pages

Eminent EM6505 - e-Domotica e-Centre 2 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info