5.5.1 E-mail/FTP alarm
The EM6270 provides the Email/ftp function, you can enable or schedule the Email/ftp
ability in this page, the EM6270 will then send out an email with a jpeg picture
attached in the email and/or send out the jpeg picture file to a ftp server. The related
settings are explained below:
1. Email/FTP trigger – choose between “motion”, “PIR”, “schedule” and “disable”
A. If “motion” is selected, it means that when there is a motion detected, the
system will send out the email and/or ftp with the captured video snapshot.
B. If “PIR” is selected, it means that when there is a PIR alarm detected, the
system will send out the email and/or ftp with the captured video snapshot. If
the PIR alarm is constantly on, the EM6270 will keep sending out email/ftp
message every second for up to 30 seconds.
C. If “schedule” is selected, it means that the email/ftp alarm detection and
triggering will be scheduled by the “scheduling” in section 5.5.5.
D. “disable” will disable the email/ftp alarm.
2. Motion sensitivity – there are 10 possible choices in this field.
3. “High” means high sensitivity, i.e., the motion detection is triggered by a very small
movement in the video image. If “High” is selected and the size of the moving
object is larger than about 1% of the whole video area, it is detected. Please be
noticed that the real size of the object could be large or small, anyway, the
detection is only based on the relative size of the object. Probably a small pencil
moving near the EM6270 could be detected, but a moving car far away from the
EM6270 could not be detected.
4. “Low” means low sensitivity, i.e., the motion detection is triggered by a very large
movement. If the size of the moving object is larger than about 10% of the whole
video area, it is detected. “Median” means 3% to trigger the detection.
5. Send email message – if this item is enabled, the EM6270 will send out an email
message with the jpeg picture attached to the specified email account.
6. Email recipient#1~#3 – this is the email address to receive the detection notice
message. An email message with the jpeg picture file named by the date/time of
the triggered moment will reach this address.
7. Send FTP message – if this item is enabled, the EM6270 will send out a jpeg
picture file to the specified ftp account.
8. FTP server – this is the FTP server address to receive the jpeg file.
9. FTP username/password – this is the username/password to login into the FTP
server, so, this triggered jpeg file will be allowed to reach this FTP server.
10. Remote folder – the jpeg file will be put under this folder of the FTP server.
When this modification is Saved, it works immediately, but all the connected video
viewing users will be disconnected.
The default setting is “Disable”.
