65
|
ENGLISH
“Internet speed”, the system will need to degrade the video motion or image
quality. This selection will decide if the user want to maintain the “video motion” or
“image quality” when the internet speed is not good enough.
7. Brightness – the brightness of the video, lower value means darker display.
8. Sharpness – the sharpness of the video, higher value means sharper video.
9. Low light sensitivity – The low light sensitivity could be normal, high or very high.
When the low light sensitivity is high, the system could see better video clearance
under low light situation, but the moving object will not be very clear under this low
light environment. Under very dark environment, set to “very high” will get better
video clearance. The default value of this setting is “high”.
10. Video color – choose between “colored” and “black & white”.
11. Video flip – can do “normal” or “flip” video display, this is needed if the EM6260 is
installed on the ceiling or wall.
12. Outdoor/Indoor video – for better video display quality, modify this setting when
taking indoor or outdoor video. The default setting is “Outdoor video”, in most
cases, this is also ok for indoor usage. Under some special cases, there could be
some lines on the video display when the EM6260 is taking indoor video. In this
situation, change the setting to “Indoor video” will solve the problem. Please also
be noticed that in “Indoor video” setting, the video display of outdoor view is very
vague. For indoor usage, if there is strong sun light into the room, please select
the “indoor+sun light” choice. (Some light sources interfere the video quality to
change the frequency of the recordings you need to select indoor video or
indoor+sunlight to change the value to 60Hz or 50Hz.
13. Enable/disable audio microphone – you can enable or disable the audio
microphone on the EM6260. If disable, there will be no voice on the Easy Pro
View video viewing.
14. Enable/disable time display on video – if enabled, the date/time of the system will
be displayed on the left-upper corner of the video.
When this modification is saved, it works immediately, but all the connected video
viewing users will be disconnected.