612369
60
Zoom out
Zoom in
Previous page
1/228
Next page
27
|
ENGLISH
surveillance recorder. Make sure the hard disk is aligned with the four screw holes
and use the (supplied) screws to fix the hard disk.
5. Place the cover back onto the casing and tighten the screws again.
6. Connect al necessary cables and start the surveillance recorder.
7. Once the surveillance recorder has been started, click ‘Start’.
8. You need to login using an admin account. Fill out the password you have set
during the wizard and click ‘Login’ or do not fill out a password if you have not
used the wizard or if you do not have set a password and click ‘Login’.
9. Click ‘Disk’.
10. You will now see the status of the internal hard disk.
11. Place a mark at the ‘Format’ box.
12. Click ‘Format’.
13. Click ‘Yes’ at the ‘Are you sure you want to format this drive’ question after which
a ‘Formatting’ screen appears. Please be patient while the hard disk is being
formatted.
14. Click ‘OK’ at the ‘Formatting success!’ screen.
15. The internal hard disk is now ready to be used.
As long as the (new) hard disk has not been formatted using the menu of the
surveillance recorder, the surveillance recorder will make a beeping sound. This is an
indication the hard disk is not ready to be used.
14.0 Other functions
In the menu of the surveillance recorder, you will find a few functions which have not
been explained yet. In this chapter we will shortly explain these functions.
Main menu (default screen)
Auto Sequence: This function is located in the main menu of the surveillance
recorder. By using this function, the surveillance recorder will use
all available channels and shows each channel separately on
screen. The surveillance recorder will switch to another channel
automatically. You can change the ‘Auto sequence’ settings if you
are logged in the main menu and then select
‘BasicDisplayAuto sequence’.
Main menu (When logged in)
Disk: Here you can view the status of the built-in hard disk. You can
format the hard disk which is built-in the surveillance recorder.
You can also enable or disable the overwrite option, which is on
by default.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM6104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM6104 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info