612372
3
Zoom out
Zoom in
Previous page
1/7
Next page
3 | ENGLISH
2.0 Preparing the camera for usage
The EM6029 has been designed to be mounted on walls or ceilings. Use the following
steps to mount the camera correctly, so you can use the camera in combination with
the Eminent EM6001, EM6005 or EM6015 DVR unit.
1. Shut down the DVR recorder by pulling out the plug from the wall outlet.
2. Take the camera out of the packaging.
3. Use the mounting foot to mark the holes on the location you want to mount the
camera.
4. Drill the holes and fill these holes with mounting plugs.
5. Attach the camera foot with the screws to the wall or ceiling.
6. Mount the camera to the mounting foot.
7. Connect a video cable (BNC) to the camera.
8. Connect the other end of the video cable (BNC) to the EM6001, EM6005, or
6015.
9. The video cable can directly be connect to one of the video-inputs 1 till 4 of the
EM6001 or EM6005. In case of the EM6015, the video cable can be connected to
one of the video inputs 1 till 8.
10. Check whether your DVR recorder has been shut down properly and the DVR is
not connected to a wall outlet!
Note: Steps 11 to 15 are only necessary if you want to zoom in using your DVR
recorder.
11. Take a UTP network cable (For example: The Eminent EM6062) and remove
5cm of the mantle of both ends of the cable, so the bare UTP wires are exposed.
12. Now strip the cable at both ends. Make sure you maintain 5mm of bare copper.
In the following steps we have stripped the following UTP wires: Blue and blue-
white.
13. Connect the ‘485Aof the DVR recorder. For connecting, use the blue UTP wire.
14. Connect the ‘485B’ of the camera to the ‘485B’ of the DVR recorder. For
connecting, use the blue-white UTP wire.
15. Now check whether you have connect the wires properly.
16. Now connect the power conversion cable to the camera by connecting the red
cable to the ‘12V’ connection of the camera. Connect the other cable to the
‘GND’ connection of the camera. Connect the other side of the power conversion
cable to the power adapter of the DVR recorder.
17. Connect your DVR recorder to a wall outlet to power the DVR recorder. If
correctly connected, the ‘POWER’ LED on the EM6029 will be lit.
18. Possibly you have to setup the EM6001, EM6005 or EM6015 for using this
camera (If you have not done this already, please refer to the supplied manual of
the EM6001, EM6005 or EM6015).
19. The camera is now ready to be used.
20. By using the button at the back of the camera, camera settings can be altered.
Settings are: ‘Auto focus’, ‘zoom’, ‘indoor’ and ‘outdoor’.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM6029 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM6029 in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eminent EM6029

Eminent EM6029 User Manual - German - 8 pages

Eminent EM6029 User Manual - Dutch - 7 pages

Eminent EM6029 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info