7 | ENGLISH
4. If there is no DHCP active within your network, or you want to manually fill in an
IP address, set ‘Type’ to ‘Static’ and fill in the corresponding IP address data of
your network. However, in order to obtain maximum network stability, it is
recommended to make use of static IP settings
5. Click ‘Apply’.
6. Click ‘OK’.
7. Click ‘Exit’ until you are at the main menu.
In order to obtain maximum network stability, it is recommended to make use of static
IP settings.
Attention! In order to access the EM6015 using the Internet, make sure you have filled
in the IP address data correctly. If not, a connection from the Internet may not be
established.
3.4 Selecting the screen language
The on screen display and webpage of the DVR are available in several languages.
This manual is based on the English language which is the default language setting of
the DVR. You can select your own language with these instructions:
1. Right click on the screen with the mouse.
2. Click on ‘Main Menu’.
3. A login window appears. If you have setup a password earlier, enter your
password. If not, continue with the next step.
4. Click on ‘Apply’.
5. Click ‘Basic’.
6. Click ‘Language’.
7. Select your desired language from the list.
8. Click ‘Apply’.
9. The system needs to restart, so click ‘OK’.
10. After a few minutes the DVR is available in the selected language.
4.0 Connecting a camera
Four cameras are supplied. In the following chapter we will explain how to connect
these cameras.
Before mounting the cameras you need to take the following precautions:
- Make sure the cameras can indeed view the area you want to guard. It can be handy
to test some locations before mounting the cameras.
- Do not place the cameras directly to the window or other glass surfaces to prevent
reflections.
- The night vision of the cameras is limited compared to viewing the image during day
time. So make sure the cameras are mounted in such a way, the night vision is
sufficient to view the intended area(s) during night time.
