818542

Emerio WK-122248 Manual

8
Zoom out
Zoom in
Previous page
1/54
Next page
- 7 -
Auto start function
If you want to set the auto start time to brew water, firstly follow the steps “1) - 3)” in section “Brew
water”. If you want to set the auto start time to brew tea, firstly follow the steps “1) - 4)” in section
“Brew tea”.
And then follow the below steps:
- Press and hold the button “AUTO START” for approx. 2 seconds. The indicator light of the button
“AUTO START” will illuminate in blue and the digital display will flash the “CURRENT TIME” and the
“START TIME”.
- Press the temperature setting buttons to set the current time, the digital display will show the value
under “CURRENT TIME”. Press the time setting buttons to set the start time, the digital display will
show the value under “START TIME”. (See below picture.) The time cycle is 24 hours. Long press for
rapid adjustment.
- Then press the button “ON/OFF” to enter into the auto-start working mode. The digital display will
extinguish after 20 seconds.
- When the current time counts to reach the start time, the appliance will start brewing.
Keep warm function
Press the keep warm button during brewing, its indicator light will illuminate in blue. After brewing is
finished, 3 beep sounds will be heard and then the appliance will enter into keep-warm mode. The
digital display will start to count the time and extinguish after approx. 20 seconds. You can press any
button to turn on the digital display to check the current temperature and the keep warm time. The
whole keep-warm process will last 30 minutes. The keep-warm temperature is ≥60℃. Press the button
“ON/OFF” or “Keep warm” to exit the keep warm function. Under keep-warm mode the tea-brewing
basket should not move. It should stay on top.
Press the keep warm button after the brewing is finished, the digital display will show “- -” and then
show the current water temperature.
- If the current water temperature is ≥60℃, the appliance will enter into keep-warm mode. The digital
display will start to count the time and extinguish after approx. 20 seconds. The keep warm function
will operate as above.
- If the current water temperature is ＜60℃, the appliance will not enter into keep-warm mode. The
digital display will flash the temperature value 3 times and extinguish after approx. 20 seconds.
Tips:
The digital display will extinguish in approx. 20 seconds with no operations. If you want to do further
operations, press any button first to turn on the digital display and then press the buttons to choose
your desired functions.
The appliance will not work if the set temperature is lower than the current water temperature.
Boil-dry protection
Should you accidentally let the kettle operate without water, the boil-dry protection will automatically
switch off the power. If this occurs, allow the kettle to cool before filling with cold water and re-boiling.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio WK-122248 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio WK-122248 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info