Manual Emerio WK-108054 (page 23 of 40) (English, German, Dutch, French, Swedish, Finnish)

582570

Zoom out

Zoom in

1/40

WK-108054 EN

HOUSEHOLD USE ONLY

PARTS DESCRIPTION

1. Lid opening button

2. Handle

3. Water Gauge

4. On/Off Switch and adjustable temperature control

5. Power Base

6. Anti-calc filter

BEFORE USING YOUR KETTLE

If you are using the kettle for the first time, it is recommended that you clean your kettle before use by

boiling a full kettle of water twice and then discarding the water.

OPERATION OF YOUR KETTLE

1. Open the lid; fill with the desired amount of water to the water kettle. Always fill the kettle between

the minimum (0.5L) and maximum (1.7L) marks. Too little water will result in the kettle switching off

before the water has boiled.

NOTE: Do not fill the water over the maximum level, as water may spill out of the spout when boiling.

Ensure that the lid is firmly in place before connecting the power cord to the outlet.

This water kettle is equipped with an overfill safety feature. This will make sure that in case of

overfilling the kettle the water will not come in contact with electrical components of the kettle

ensuring no unsafe situations can occur. In case of overfill the water will be lead trough the inner side

of the kettle and will exit the kettle at the bottom, away from the electrical element.

2. Connect the plug into a power outlet. Press the On/Off Switch button on the handle and the kettle

starts to boil the water. The LED light will be shining in red. The kettle will switch off automatically

once the water has boiled. You can shut off the power by pressing the switch button again at any

moment during boiling water.

NOTE: Ensure that switch is clear off obstructions and the lid is firmly closed. The kettle will not turn

off if the switch is constrained.

3. Take the plug out of the outlet. Lift the kettle then pour the water.

NOTE: operate carefully when pouring the water from your kettle as boiling water will scald.

4. The kettle will not re-boil until the switch is pressed again. Allow to cool for 30~40 seconds before

reopening to boil water.

NOTE: Ensure power supply is turned off when kettle is not in use.

5. Should you accidentally allow the kettle to operate without water; the boil-dry protection will

automatically switch it off. If this occurs, allow the kettle to cool before filling with cold water and

re-boiling.

Advanced operation:

1. Keep warm function:

Press the On/Off Switch for 3 seconds until a “beep” sounds; the kettle will be shining with red light on

and off. After the water boils, the kettle will keep it warm for 2 hours and go on heating when the

temperature drops below 85°C .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Emerio WK-108054 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 1,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Emerio WK-108054 Manual

Product: