702134
6
Zoom out
Zoom in
Previous page
1/33
Next page
- 5 -
TO-122830.3 EN
FUNCTIONAL CHARACTERISTICS
1. Toast aperture
2. Toasting lever
3. Electric browning control
4. Full-length crumb collector
5. Bun warmer
6. Bun warmer lever
7. Cancel button
8. Reheat button
9. Defrost button
INSTRUCTIONS FOR USE
Before initial use:
Before using the toaster for the first time, clean your toaster (see Chapter “CLEANING AND MAINTENANCE”).
Operate the toaster at least twice without bread and on the highest setting. Ventilate the room during this
period.
This appliance may emit a characteristic smell when you switch it on for the first time. This is normal, and
no harm.
Make sure the crumb collector is completely positioned in place before using.
Use:
1. Insert the power plug and cable into the socket and the appliance is in standby mode.
2. Insert up to two slices of bread in the browning slot.
3. Use the browning control switch to select the desired degree of browning between 1 and 7 (1 = lightest; 7 =
darkest degree of browning). No. 3 is recommended for first use. The degree of browning chosen depends
on the type of bread and individual taste.
4. Press the toasting lever down until it engages. The toasting process starts automatically. The indicator light
of cancel button ” will illuminate.
5. Please remember that the toasting lever will not engage if the power plug is not inserted in the socket and
the toaster is not switched on.
6. The toaster switches itself off automatically and the toasted bread is ejected when the desired degree of
browning has been reached. The cancel button can always be used to cancel the browning process.
Bun warmer:
Press bun warmer lever down to lift up the bun warmer; raise the lever to reset it.
Only use browning degree 1 or 2 for the bun warmer.
Note:
1) Take care when removing bread as the bread and the top of the toaster will still be hot.
2) Do not change the browning selection during the toasting process. First press the “CANCEL” switch; then
turn the browning control switch to adjust the browning degree.
3) Do not place any rolls, irregular bread, round bread, etc. directly on the toast aperture but place them on
the bun warmer. If only toasting one side of the bread, please place it on the bun warmer.
4) Make sure if toasting on the bun warmer, do not insert bread into the toast aperture. A fire may occur.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio TO-122830.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio TO-122830.3 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info