Manual Emerio PH-122042 (page 7 of 54) (English, German, French, Italian)

701979

Zoom out

Zoom in

1/54

- 6 -

Accessories pack 1 set:

- 1 x drill bit (8mm)

- 4 x rail fittings

- 4 x screw bolts

- 4 x caps for bolts

1. Mark the positions of the four holes to be drilled on the wall. (Better install the appliance in a height of

20cm – 100cm from the floor to get the best performance.)

2. Drill the holes with the drill bit.

3. Insert the plastic rail fittings into the holes.

4. Attach the appliance onto the four rail fittings through the four holes in the appliance.

5. Screw the four bolts into the plastic rail fittings.

6. Cover the bolts with the caps. It is recommended to use some glue to make the caps stick onto the bolts

firmly.

NOTE: make sure the distance between the bottom of the appliance and the floor is no less than 20cm when

the appliance is installed.

OPERATION

Plug the appliance into an appropriate electrical outlet. Turn on the appliance by pressing the power switch to

position “I”. The power switch will be illuminated. The appliance is standby. Press the standby button “ ” to

run your appliance.

1. Temperature setting

Press button “+” or “-” to set the desired temperature. You can choose from 0℃ to 37℃. When you set your

desired temperature, the heater starts or stops heating automatically to maintain the room temperature. You

can long press the button “+ “or “-” in the control panel for rapid adjustment.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Emerio PH-122042 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Emerio PH-122042 Manual

Product: