Manual Emerio HV-112906 (page 6 of 30) (English, German, French, Italian)

701945

Zoom out

Zoom in

1/30

- 5 -

HV-112906 EN

PARTS DESCRIPTION

1. Main unit (battery)

2. Dust cup

3. Extension tube

4. Floor brush

5. Long crevice nozzle

6. 2 in 1 crevice nozzle

7. Speed button

8. Handle

9. Dust cup release button

10. Accessory release button

11. Suction hole opening

12. Locking clip

13. Recharge seat/ wall-mounted bracket

14. Charger

15. Battery release button

16. Battery pilot lights

RECHARGE SEAT CAN BE WALL-MOUNTED:

1. Measure the distance between the holes situated at the back of the bracket and drill four holes in the wall

with the same distance.

2. Put the expansion bolts into the holes and then use the screws to fix the bracket onto the wall.

3. Pay attention to the height of the bracket mounted. It shall be mounted more than 80 cm above the floor.

RECHARGING THE APPLIANCE:

1. When one pilot light is blinking in the process of operation, the appliance needs to be recharged.

2. Plug the charger into a suitable wall socket and place the vacuum cleaner onto the recharge seat.

3. While charging, the pilot light will be blinking to indicate the charger is under working. When the charging

operation is finished, the charger will switch off automatically and 3 pilot lights will be on instead of blinking.

4. After charging, unplug the charger first, and then press the battery release button to take out the appliance.

Note: Do not let the appliance uncharged for a long time, because the inner accumulators may be damaged.

OPERATION

1. Assemble the battery into the dust cup, make sure they combined firmly. (fig. A)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Emerio HV-112906 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Emerio HV-112906 Manual

Product: