678644

Emerio HF-108492 Manual

15
Zoom out
Zoom in
Previous page
1/26
Next page
DESCRIPTION OF THE DEVICE
The device consists of the following main components:
1. Power cable for power supply
2. Rotary steam outlet
3. Transparent water tank (Water capacity – 6L)
4. Device base
5. On/off switch
6. Hygrostat regulator
7. Spray output regulator
8. Device feet
9. Anticalc cartridge
10. Clean Cube
11. Control display (blue: on, red: stop)
English
FIRST USE / OPERATION
Please note: never transport the device with a full water tank.
Possible hazards:
- there is too much water in the base of the housing and the spraying power is severely reduced.
- water can escape
- the water tank can fall and become damaged (and water can leak on to the floor).
1. For this reason, base (4) of the humidifier should initially be placed in a suitable
location separately.
Important: Soak the anticalc cartridge in a water bath for 24 hours before the first use
(not in the water tank!). The resin has to absorb water to reach high performance.
2. When this base is in the desired location: Fill water tank (3) with water (hold the filling
opening slightly upright) – screw the lid back on firmly and check that it is water-tight.
Place water tank on base. Plug power cable (1) into the household power socket.
3. Switch on the humidifier using on/off switch (5) and select desired power
setting (7). The control display now appears blue. The steam outlet (2) can be turned 360°.
4. The desired air humidity can be selected using hygrostat regulator (6), from left (low hu-
midity) to right (high humidity). For example, if the regulator is turned completely to the left,
the device switches itself off at a relative humidity of approx. 30%, and only starts operat-
ing again when the humidity falls below the 30%. We recommend a medium setting
(in the comfort zone) for an optimal air humidity of around 40-60%.
Caution: the device will not switch on if the hygrostat has been set too low.
CLEANING PROCEDURE
• Switch off the device and unplug the power cable from the socket before all maintenance work
and after each use.
14
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio HF-108492 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio HF-108492 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info