701866
6
Zoom out
Zoom in
Previous page
1/41
Next page
- 5 -
2. The whole assembly
Pull the height adjustment pipe out and tighten the fasten set.
Link the fan main body and the height adjustment pipe together by the fastening screw and then fix them.
3. Rear grille assembly
Unscrew the guard fastening screw from the motor shaft.
Fix the rear guard onto the two pillars of the motor front shell. Make sure the handle is in the upside.
Screw the guard fastening screw tightly in clockwise direction.
4. The assembly of fan blade
Take the black shaft protective cover out of the shaft. Insert fan blade onto shaft ensuring blade fits
properly.
Tighten blade screw onto shaft. Note: Blade screw should be tightened in anti-clockwise.
5. Front grille assembly
Open up all locking clips on the sides of the front guard.
Place the front guard into position by lining up the location plate over the top of the rear guard and push
down.
Unscrew the small nut and bolt at the bottom of the front grille, then fasten the two guards together with
them.
Secure the two guards by closing the clips over the outer rim.
OPERATION
Please press the buttons on the control panel or the buttons on the remote control to choose your desired
function. The corresponding LED lights will illuminate accordingly.
1. On/Off function
Press the button “ON/SPEED” once to turn on the unit. The unit starts to work under normal mode at low
speed.
Press the button “OFF” to turn off the unit.
2. Speed function
When the appliance is on, continue to press the “ON/SPEED” button to set your desired wind speed from
low, mid, high, indicated with the speed lights illuminating one by one.
3. Oscillation
To make the fan head oscillate, push down the oscillation knob. To stop the fan head from oscillating, pull
up the oscillation knob.
4. Mode function
Press the mode button in your remote control to set your desired working mode:
Normal mode (mode indicator: red)
Nature mode (mode indicator: green)
Sleep mode (mode indicator: off).
1) Normal: under this mode, the motor works with the preset speed. You can press button “ON/SPEED”
to choose speed Low /Mid /High.
2) Natural: under this mode, you can press button ON/SPEED” to choose speed Low /Mid /High. The
fan will operate as follows:
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio FN-121525.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio FN-121525.1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info