Manual Emerio FN-120952 (page 5 of 34) (English, German, Dutch, Swedish, Finnish)

701862

Zoom out

Zoom in

1/34

- 4 -

FN-120952 EN

PARTS DESCRIPTION

1. Fan guard

2. Fan blade

3. Motor

4. Oscillation knob

5. Speed switch

6. Height adjustment pipe

7. Fastening knob

8. Tripod holder

9. Tripod leg

10. Butterfly fastening screw

11. Metal link pipe

ASSEMBLING INSTRUCTIONS

** Please assemble correctly by the following orders when using.

1. Tripod leg assembly

1) Remove the securing screws and nuts from the tripod holder.

2) Attach the metal part of the wooden tripod leg to the tripod holder, line up the holes and fit the securing

screws all the way through. Take note of the orientation of the leg end.

3) Fit the nut to the protruding end of the screw and tighten the nut.

4) Repeat for the other two legs.

5) Take the butterfly fastening screws out from the small bag.

6) Open out the legs, connect the three metal link pipes by the butterfly fastening screws.

7) Adjust the height adjustment pipe to your desired height and tighten the fastening knob.

2. Motor housing assembly

1) Stand the Tripod on the floor.

2) Remove the big black knob (3) and mounting bolt (2) from the top of the adjustment pipe. Unscrew the knob

and pull the bolt straight out.

3) Loosen the small screw (1) and small black knob (4) from the bracket on the motor housing.

4) Sit the motor housing on top of the adjustment pipe, insert the mounting bolt (2) through the bracket and

the pipe. Note: the Square section under the head of the bolt must be aligned with the square hole in the

bracket.

5) Pay attention to screws’ position according to the below picture. Tighten the small screw (1) into position and

screw in the small black knob (4) but do not tighten. Then, fit the big black knob (3) to the mounting bolt (2).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Emerio FN-120952 in the language / languages: English, German, Dutch, Swedish, Finnish as an attachment in your email.

The manual is 2,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Emerio FN-120952 Manual

Product: