Manual Emerio FN-114223.3 (page 6 of 28) (English, German, French, Italian, Swedish, Norwegian, Finnish)

701760

Zoom out

Zoom in

1/28

- 5 -

3. Place the fan blade onto the motor shaft by matching the slot with the shaft pin. Fix the blade by tightening

the blade fastening screw in a counter-clockwise direction. Check that the fan blade can rotate freely by

turning it with your hand.

4. Put the front guard against the rear guard and fix with the clamping ring. Make sure the clamping ring is set

properly at the rim of the fan guards. Tighten the screw on the clamping ring.

OPERATION

Connect the appliance to a suitable power source. Then press the control panel or the remote control to choose

your desired functions.

1. ON/off: Press “ ” to turn the appliance on. It will work with the following presetting: Speed: low / Mode:

normal / Timer: off / Swing: off

Press “ ” again to turn off the appliance.

2. SPEED: Press “ ” to adjust the speed.

“1”: low wind; “2”: Medium wind; “3”: high wind

3. MODE: Press “ ” to choose the mode functions from Normal →Natural → Sleeping → … (Repeating).

1) Normal: under this mode, you can press “ ” to choose speed Low /Mid /High.

2) Natural: under this mode, the appliance will operate as follows:

5 seconds medium wind → 5 seconds low wind → 5 seconds medium wind → 5 seconds high wind → 5

seconds medium wind → 5 seconds low wind → stop 3 seconds … (Repeating)

3) Sleeping: under this mode, the fan will operate as follows:

5 seconds medium wind → 10 seconds low wind → 5 seconds medium wind → 5 seconds low wind → 5

seconds medium wind → 10 seconds low wind → stop 3 seconds … (Repeating)

Note: In natural mode or sleeping mode, the motor works with the preset speed. That is, the speed button

cannot control the speed under these two modes.

4. TIMER: Press “ ” to set your desired working time from 1h →2h →3h … →7h →off. When the set time has

elapsed, the fan will be off and under standby condition.

5. SWING: Press “ ” to control the oscillation function on or off.

6. Tilting angles: By pushing the fan-guard, you can adjust the fan to the preferred elevation.

CLEANING

1. Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable

from the socket.

2. Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down

with a damp cloth and dry it carefully. Always take out the mains plug first.

3. Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it occasionally

using a dry brush or vacuum cleaner.

TECHNICAL DATA

Operating voltage: 220-240V ~ 50-60 Hz

Power consumption: 55W

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Emerio FN-114223.3 in the language / languages: English, German, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Emerio FN-114223.3 Manual

Product: