701637
5
Zoom out
Zoom in
Previous page
1/32
Next page
- 4 -
FN-110477.3 EN
PARTS DESCRIPTION
1. Front guard
2. Guard securing clip
3. Blade fastening screw
4. Blade
5. Guard fastening screw
6. Rear guard
7. Motor shaft
8. Shaft pin
9. Oscillation knob
10. Handle
11. Power cord
12. Speed control buttons
13. Upper standing shaft
14. Lower standing shaft
15. Screws
16. Standing base
17. Bulge
18. Space
ASSEMBLING INSTRUCTIONS
Base and Standing Shaft Assembly
1. Insert the lower standing shaft (14) into the hole of standing base (16), keeping the bulge (17) of standing
shaft aligned with the space (18) of the base hole. Use four screws to fix the lower standing shaft.
2. Insert the upper standing shaft (13) into the lower standing shaft (14), turning the upper standing shaft (13)
clockwise to tighten the connection of two shafts.
The Whole Assembly
1. Remove the blade fastening screw (3) and guard fastening screw (5) from the motor shaft (7) spindle.
2. Fit the rear guard (6) by positioning with the location pins. Secure the guard onto the motor body with the
guard fastening screw (5).
3. Place the fan blade (4) onto the motor shaft by matching the slot with the shaft pin (8). Fix the blade by
tightening the blade fastening screw (3) in a counter-clockwise direction. Check that the fan blade can rotate
freely by turning it with your hand.
4. Loosen the clip screw on the guard securing clip (2) and open the guard securing clip. Position the top clip of
front guard (1) onto the uppermost part of the rear guard (6). Press the rim of front guard onto the rear
guard. Close the bottom clip and tighten the screw.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio FN-110477.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio FN-110477.3 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info