701559
5
Zoom out
Zoom in
Previous page
1/29
Next page
- 4 - FN-109082
PARTS DESCRIPTION
1. Front fan guard
2. Fan blade
3. Base
4. Speed buttons
ASSEMBLY
Take the screws from the bottom of the shaft. Attach the base onto the shaft of the fan. Fix it firmly with the
screws provided.
OPERATING INSTRUCTIONS
1. Plug the power cord into a suitable socket.
2. Switch on the fan by using the speed buttons on the control panel, i.e. “ = off, “ ” = low speed, “ =
medium speed, ” = high speed.
3. Tilting angles: You can loosen the screw on the side of the shaft to adjust the fan to your preferred elevation.
Then fasten the elevation by tightening the screw.
4. Oscillation: to make the fan head oscillate, push down the oscillation knob on the top of the motor housing.
To stop the fan head from oscillating, pull up the oscillation knob.
CAUTION: Press only one of the speed control button at a time. Permanent damage to the switch housing may
result if two or more of the buttons are pressed simultaneously.
CLEANING
1. Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable
from the socket.
2. Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and then dry it carefully. Always take out the mains plug first.
3. Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it occasionally
using a dry brush or vacuum cleaner.
TECHNICAL DATA
Supply voltage: 220-240V ~ 50Hz
Power consumption: 50W
Eco design requirements
Product information requirements
Maximum fan flow rate (F)
80,63 m³/min
Fan power input (P)
48,16 W
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio FN-109082 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio FN-109082 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info