701533
5
Zoom out
Zoom in
Previous page
1/22
Next page
- 4 - FN-108740.4
PARTS DESCRIPTION
1. Guard fastening screw
2. Front guard
3. Fan blade
4. Blade fastening screw
5. Rear guard fastening screw
6. Rear guard
7. Nut
8. Motor
9. Supporting tube
10. Rubber ring
11. Fastening knob
12. Tripod leg
13. Butterfly fastening screw
14. Connecting rod
ASSEMBLING INSTRUCTIONS
** Please assemble correctly by the following orders when using.
1. Tripod leg assembly
Take down the butterfly fastening screws (13) from the legs.
Attach the three connecting rods (14) together with each tripod leg (12). Fix them firmly by using the
butterfly fastening screws through the holes in the connecting rods.
Check the screws; make sure the legs stand securely.
2. Fan head assembly
1) Rear guard:
Unscrew the rear guard fastening screw (5) on the front of the motor (8).
Insert the two hangers (the ones without hole) on the rear guard into the two oval bushings (the bigger oval
holes) on the front of the motor.
Align the third hanger on the rear guard with the screw hole on the front of the motor and fix it by fastening
the screw (5). Make sure the handle on the rear guard is on top of the fan basket.
2) Fan blade:
Loosen the blade fastening screw (4) on the back of the fan blade (3).
Slide the fan blade (3) onto the motor shaft.
Align the blade fastening screw (4) with the locking notch on the motor shaft. Tighten the screw to secure
the fan blade firmly.
3) Front guard:
Put the hook of the front guard (2) onto the top of the rear guard (6).
Close the retaining clips. Ensure the screw hole on the front guard and rear guard are lining up.
Use the guard fastening screw (1) to secure the front guard and rear guard. Tighten with the nut (7).
3. The whole assembly
Loosen the fastening knob (11) on the top of the assembled tripod.
Check and make sure the rubber ring (10) is on the supporting tube (9) of the fan head. Insert the
supporting tube into the hole on the top of the assembled tripod.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio FN-108740.4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio FN-108740.4 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info